Summary of Contents for Rothenberger ROREC Pro Digital
Page 1
ROREC Pro Digital DE Bedienungsanleitung SV Bruksanvisning EN Instructions for use FI Käyttöohje FR Instruction d’utilisation PL Instrukcja obslugi ES Instrucciones de uso CZ Návod k používání IT Istruzioni d’uso TR Kullanim kilavuzu HR Upute za uporabu NL Gebruiksaanwijzing EL Οδηγίες χρήσεως PT Instruções de serviço DA Brugsanvisning www.rothenberger.com...
Page 3
Contents Page Safety Notes ........................10 Intended use........................10 General safety instructions ....................10 Special safety instructions ....................11 Scope of delivery ........................ 12 Technical Data ........................12 Function of the Unit ......................12 Overview (A) ........................12 Commissioning ......................... 12 Operation .........................
Page 4
Safety Notes Intended use The ROREC Pro Digital Recovery unit is only used to extract refrigerants from Refrigeration cy- cles, according to the technical data. Other uses are prohibited! This device may only be operated by qualified personnel who are familiar with the fundamentals of refrigeration technology, the refrigeration cyclesand the refrigerants and knows the dangers which can arise from devices under pressure.
Page 5
15 Pull the plug from the socket. When not using the electric tool, before maintenance or when changing tools, such as saw blades, drills and cutting bits. 16 Do not leave any tool keys inserted. Before switching on, check to see that keys and ad- justment tools have been removed.
Page 6
OFP display (in combination with an OFP cable) Commissioning Description of the ROTHENBERGER Recovery unit: The Recovery unit is used to extract refrigerants from refrigerant cycles. It is a two-piston compressor device which totally extracts all refrigerant. A low pressure switch protects against damage to the piston.
Error messages: The following error messages can appear on the display: LP E1: The low pressure sensor is not attached HP E1: The high pressure sensor is not attached E2: The feed voltage is too low E3: The feed voltage is too high E4: The motor is overloaded General comments: Always use the device with a refrigerant filter to avoid damaging the compressor!
Page 8
Also only just use one refrigerant for each filter. Customer service The ROTHENBERGER service locations are available to help you (see listing in catalog or on- line) and replacement parts and service are also available through these same service locations.
Page 9
Disposal Components of the unit are recyclable material and should be put to recycling. For this purpose registered and certified recycling companies are available. For an environmental friendly dispos- al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal authority.
Need help?
Do you have a question about the ROREC Pro Digital and is the answer not in the manual?
Questions and answers