Boifun VB805 Manual

DESCRIPTION

1. Light Sensor
2. Camera Lens
3. Power LED Indicator
4. Microphone
5. ON/OFF Switch
6. Infrared Lights
7. Speaker
8. DC Jack IN
9. Temperature Sensor
10. PAIR Button

1. Antenna
2. Brightness Buttons
3. Volume Buttons
4. Power ON/OFF/Sleep Button
5. Lullaby Control Button
6. Zoom Button
7. Menu/OK Button
8. Return Button
9. PTT Button
10. Signal LED Indicator
11. Charging LED Indicator
12. Navigation Buttons
13. Microphone
14. LCD screen
15. Volume Level LED
16. Speaker
17. Battery Compartment
18. Kickstand
19. DC Jack IN

1. Signal Strength Indicator
2. Channel Selected
3. Temperature Of The Baby's Room
4. Zoom Level
5. VOX Function Active
6. Alarm Timer Active
7. Volume
8. Lullaby Playback Active
9. Current Time
10. Battery Power
11. PTT Function Active
12. Pan & Tilt Function Active
13. Backlight Brightness Bar
14. Volume Level Bar

Specification

CONNECT THE CAMERA TO THE MONITOR

NOTE: Use only the power adapters included in the package. If the display screen and the red power button are not on, you need to connect the monitor to the power cord for charging.

1. Connect the camera to the power cord;
   
2. Turn on the camera, and the blue LED lights up;
   
3. Long press the display switch for 3 seconds, the red power light is on;
   

NOTE: If you have problems with connection, please feel free to contact admin@boifun.net for one-on-one customer service guidance.

Pairing

NOTE: The Baby Unit is pre-registered and connected to your Parent Unit. If you need to pair Baby Unit and Parent Unit again, do the following:

1. Select MENU > Camera > Add Camera > OK;
   
2. Please short press PAIR button on Baby Unit.
   

NOTE: If you have problems with connection, please feel free to contact admin@boifun.net for one-on-one customer service guidance.

FAQ

Q: The monitor cannot be previewed properly?
A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly.

Q: Display and camera cannot be paired?
A: Please refer to "CONNECT THE CAMERA TO THE MONITOR" and "Paring" of the Product Manual for pairing.
NOTE:

1. Please connect the camera and display to the power cord for charging to avoid failure caused by power exhaustion;
2. Please confirm that you have turned on the switch of the camera, and the blue power light is on; the red power light on the display is on.

Q: Why does the monitor or camera sometimes make a slight noise?
A: Please do not place the camera and the monitor too close (less than 30 cm), too short transmission distance will cause the signal to be transmitted in a loop, resulting in noise.

Q: Why does the monitor screen not light up when the camera detects sound?
A:

1. Please confirm that you have turned on the VOX function;
2. Please select the sensitivity of VOX mode according to your needs: low/medium/high.

If you encounter any other problems, please send your order number and problem to admin@boifun.net. Receiving your message, we will provide a fast solution via email within 24 hours.

AFTER-SALE SUPPORT

If you have any issues, please email your order number and the problem to admin@boifun.net. Receiving your message, we will provide a fast solution in 24 hours.
Official Website