Boifun Baby 6T Manual

DESCRIPTION

APP INSTALLATION

BoifunCam is available for both iOS and Android OS. Search the name 'BoifunCam" in App Store or Google Play or scan the OR-Code to download the App.

Download the App:

NOTE: A very small number of mobile phone models may not be compatible with BoifunCam. We apologize for any inconvenience this may cause. lf you encounter this situation, could you please send us your phone model by email? Our email address is admin@boifun.net. We will optimize the software in time, and we have prepared a backup software "CloudEdge" for you, which you can download and use from the Google Store or Apple Store. We would greatly appreciate your understanding and kindness!

CONNECT THE CAMERA TO THE APP

The camera can be connected both to the monitor and the App Generally, it is connected to the monitor bg default.
Follow the steps below to connect the camera to the App:

1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn't support 5 GHz Wi-Fi.
2. Download the BoifunCam App on your phone Register a new account to log in or log in directly.
3. Press the Reset button for five seconds until you hear the "BOOGU" beep, which means the camera has been reset. after 10-20 seconds, you will hear another beep and the red light of the camera blinks slowly.
4. Follow the step instructions on your smart phone to add the camera, and scan the QR code with your camera.

CONNECT THE CAMERA TO THE MONITOR

Power on the camera and the monitor. and then the camera will connect to the monitor automatically.

Note: If the connection to each other is not successful the first time, press and hold the Reset button on the back of the camera and reconnect the monitor after the second beep of the camera. The connection is distance limited, so make the distance between the camera and the monitor is no more than 1000ft.

DISCONNECT THE CAMERA TO THE MONITOR

1. Press Menu button on the display screen, and select > Camera > Camera Management.
2. Long press the OK button on the display screen to release the binding.
   

RECONNECT THE CAMERA TO THE MONITOR

1. Press the Menu button on the display screen, and select > Camera > Camera Management
2. Long press the camera Pairing button until you hear the prompt tone.
3. Press the OK button on the display screen to start pairing.
   Note: If you have problems with connection, please feel free to contact admin@boifun.net for one-on-one customer service guidance.
   

CONNECTING TWO CAMERAS TO THE DISPLAY.

Follow step above to connect the two cameras in turn. Two screens will appear on the monitor

Press the for camera selection, the icon in the upper left corner represents the currently selected camera, then you can remotely control the selected camera under split-screen vie\NL

Press the OK key ta enter the selected camera in full-screen view, Press the back key to return to the split-screen view,

GENERAL SETTING

Set up volume:

1. Press Menu button an the display screen, and select and press OK to enter the interface.
2. Press UP and DOWN direction buttons to adjust volume.

Set up brightness:

1. Press the Menu button on the display screen, select and press OK to enter the interface.
2. Press UP and DOWN direction buttons to adjust brightness.

Set up time:

1. Press the Menu button on the display screen, and select > Time setting
2. Press Direction buttons to change date, time and time displaying mode.

Set up language:

1. Press the Menu button on the display screen, and select > Language.
2. Select the language you need.

Set up sleep mode:
Yau can set up sleep made to increase standby time

1. Press the Menu button on the display screen, and select > Sleep mode.
2. Select Sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off.

Setting camera Status indicator:

1. Press the Menu button on the display screen, select and press the OK button to enter the interface.
2. Press the left and right arrow kegs to select on or off.

SD card:

1. Press the Menu button on the display screen, and select > SD card management. Then you can view the total capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up.

Note:
This product does not support hot-swapping.
Please insert the SD card before power on or unplug it after power off.

Upgrade:
Make sure your camera is connected to a 24 GHz Wi-Fi.
Yau can upgrade your camera when the upgraded alarm appears. Or press Menu button on the display screen, and select > Device information to check whether it need to be upgraded.

Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the display screen Please charge the display os soon as possible.

Night Light Setting:
Press the Menu button on the display screen. and select > Light>Night light, select night light mode.

Motion Tracking & Alarm Area

1. Motion Tracking: Open BoifunCam app. click your device, click the pinion icon in the upper right corner, select Motion Tracking and open it,
2. Alarm Area: Open BoifunCam app, click your device, click the pinion icon in the upper right corner, select Alarm Management > Motion Detection > Alarm Area.

Onvif Settings:
Open BoifunCam app. click your device, click the pinion icon in the upper right corner, select Onvif Setting, you need to set password to enable this function.

If you need to learn more about the functions of the baby monitor (Add Device, Play Music, Feeding Reminder, Humiture Detection, Safety Protection, etc.), please scan the QR code of the electronic manual on this guide to view the details.

FAQ

Q: The monitor cannot be previewed properly?
A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly.

Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera Long press the button for 3 seconds, and follow the step instructions of the display (To enter the pairing interface of the display, press the Menu button on the display screen, and select > Camera Management).

Q: What if the monitor screen is stuck and it doesn't work while pressing any buttons?
A: Press the reset button of your monitor with the pin, and then long press the power button of your monitor to restart it.

Q: Why I can' t get the notifications with my cell phone App when I connect the camera to the monitor?
A: Please confirm that the App has been running an the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system has been opened.

Q: How can I add devices or configure my network?
A: The camera can be connected to both the monitor and the application. Generally, it connects to the monitor by default.

Q: The sound and cry detection function does not work.
A: The sound detection interval is 1 minute, after the sound triggers the alarm, the interval is 1 minute again to avoid frequent alarms. The cry detection function can detect most babies crying. This function uses a sound filtering algorithm, so some crying may not trigger the "cry detection" function; Please follow the steps below to connect the camera to the application.

1. Make sure the Wi-Fi network is a 2.4GHz network, as the camera does not support 5GHz Wi-Fi.
2. Download the appropriate application on your phone. Register a new account to sign in or sign in indirectly.
3. Press the Reset button ta reboot the camera until the red status light flashes slowly (you must connect the camera to the app within 2 minutes or you must reboot the camera again).
4. Follow the step-by-step instructions on your smartphone to add the screen and scan the QR code with the camera.

Q: How is the picture quality of this baby monitor?
A: This baby monitor can provide you with 2K/3MP ultra HD resolution picture on mobile phone and 1080p HD resolution picture on display, it also supports 2x and 4x digital zoom.

Q: How many cameras can be paired with the display?
A: Currently, the monitor supports up to two cameras, and you will be able to view two images on the monitor at the same time and control the cameras remotely.

Q: Can I set up motion tracking and alarm zones on the monitor?
A: No. you need to set the motion tracking and alarm area through the BoifunCam APP.

If you encounter any other problems, please send your order number and problem to admin@boifun.net. Receiving your message, we will provide a fast solution via email within 24 hours.

AFTER-SALE SUPPORT

If you have any issues, please email your order number and the problem to admin@boifun.net. Receiving your message, we will provide a fast solution in 24 hours.

Please do not worry. Actually, many problems can be easily solved bu setting. If you have any questions or ambiguities during using, please feel free to contact us. We will try to find a good solution with our professional product engineers.

Official website:

Documents / Resources

References

• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Boifun Baby 6T Manual