Subscribe to Our Youtube Channel
Related Manuals for Tubbutec ModyPoly
Summary of Contents for Tubbutec ModyPoly
- Page 1 Tubbutec ModyPoly Midi retrofit and feature extension Installation Manual for Polysix v1.0 http://tubbutec.de...
-
Page 2: Installation
1. INSTALLATION Installation The ModyPoly is a drop in replacement for the ”key assigner” IC and thus very easy to install. Just plug and play basically. Three holes for the midi sockets and the sustain pedal jack have to be drilled in the back of the Polysix and if you want to be able to control the filter via midi there is one cable to solder. -
Page 3: Installing The Processor Board
You can use a small screw driver to carefully lift the processor out of its socket. When putting the ModyPoly board into the socket, mind the ori- entation (cables are on the right side) and be careful not to bend any pins. -
Page 4: Pitch Bend Calibration
MIDI device that can send pitch bend messages to the ModyPoly. A MIDI keyboard will work, but we do recommend a DAW, as here the pitch bender does not return to zero, but can be set to a constant... - Page 5 This is why a DAW is more handy, as you would need to hold the bender in a fixed position on a MIDI keyboard. 1.8 3rd CV out The brown wire is an optional 3rd CV out that can be used for various purposes such as resonance control. Check the Tubbutec blog for tutorials.
- Page 6 1. INSTALLATION Figure 3: Placement of board in Polysix and filter connection...
Need help?
Do you have a question about the ModyPoly and is the answer not in the manual?
Questions and answers