VEWIOR V01 Manual

YOUR HUMIDIFIER

SPECIFICATIONS

Input: AC100-240V 50/60Hz

Rated: 18W

Auto shut-off, anti-dry protection

Accessories: Adaptor, User manual

Output 24V 750mA

Product Weight: 1304g

Product Size: 185 x 280mm

Operating Temperature: 10-40 ºC

Materials: PP

Type: Ultrasonic

Please use water-soluble essential oil

Tank Capacity: 4.5 L (MAX)

The above specification may vary due to product upgrades.

PACKAGE CONTENTS

PRODUCT OVERVIEW

BEFORE USING

1. Please take power adapter and instruction from the water tank, and assembled the humidifier once more.
2. After unpacking, please check whether there is any defect of all the components listed on the instruction list. If there are missing or broken parts, please contact us for replacement.

USE THE HUMIDIFIER CORRECTLY

1. Place humidifier on a solid and even surface, then you can pour water from top directly.
   
2. DO NOT fill water from the mist outlet on the top of the humidifier, otherwise the humidifier will not work for a while until the water in the mist outlet enter the water tank.
   
3. You can also remove the motherboard directly, then fill the tank with water.
   
4. Do not exceed the max capacity mark.(Attention: The max and min water line is inside the water tank.)
   

FUNCTIONS

* Important Notes

1. The default speed is "H"(the highest).
2. The "H", "M", and "L" buttons are mainly used to show the speed state. Not for speed control directly.
3. The power button "" is the on y valid button. Please press the power button to adjust the mode that you need.
4. When the humidifier has no water, the blue atmosphere light will flash for 3 seconds then the humidifier will shut down automatically.

Speed Mode Function
The humidifier has three speed modes as follows.
H -the highest speed
M -the middle speed
L--the intermittent mode

1. Plug the DC24V power cable and touch the power button to turn the humidifier on. (The default speed "H" starts at the same time. The LED Light shows "H")
2. Touch the power button to change the speed to "M" from H". (The LED Light shows "H""M")
3. Touch the power button "" to change the speed to "L" from "M". (The LED Light shows "M""L")

Atmosphere Light Fuction

1. Long touch the power button for 2 seconds to turn on the atmosphere light.
2. Long touch the power button for 2 seconds to turn off the atmosphere light.

How to turn off the humidifier?

1. lf your humidifier is on the "H" mode, please touch the power button " " three times. (The LED Light shows "H""M""L"off)
2. lf your humidifier is on the "M" mode, please touch the power button " " two times. (The LED Light shows "M""L"off)
3. lf your humidifier is on the "L" mode, please touch the power button "" one time. (The LED Light show "L"off)

Tip: When the humidifier was turned off. the humidifier will still work for 30 seconds to blow away the residual fog in the water tank

MAINTENANCE CONSIDERATIONS

• VEWIOR humidifier is designed to be cleaned in an easy way. Please regularly clean the water tank, spray chamber container, and internal parts which are in direct contact with water.

1. Turn off and unplug the humidifier before cleaning
2. Pour out the water from the water tank and spray chamber container completely.
3. Clean the spray chamber container and water tank with a soft brush to avoid the impurities reducing the useful lifespan of the humidifier.
4. In order to prevent the humidifier from stopping working due to circuit failure, please wipe the water stains on the surface and back of the motherboard frequently.
5. Do not wash or clean the humidifier with strong chemical reagents or detergents. Clean the dust with a soft cloth. Wipe the stains with alcohol cotton ball gently.
6. It is recommended to clean the water tank once a week and the spray chamber container once a month.
7. When the long period of time when not in use, you need to clean the units regularly.

PRECAUTIONS FOR USE

1. Please don't add water to the mist outlet, because the water will accidentally flowing into the circuit board and damage the motherboard.
2. Please keep the spray chamber assembly upright and do not invert it. Wrong operation will cause the water flow back to the motherboard and lead machine failure.
3. The water level should be above the minimum water level, but below the maximum water level. (marked on the inside of water tank)
4. Use new silicon value, safe and reassuring, the power will be off automatically when water is insufficient.
5. Please use pure water, cold boiled water, distilled water and other water with few minerals and impurities, because it will not pollute the air in the room, and it is not easy to produce contaminant.
6. Tap water is not recommended, which can be sucked into the body through the humidifier, causing symptoms such as coughing.
7. If the humidifier stops working, take out the spray chamber container and empty the water inside.

ASSEMBLY / DISASSEMBLY

SAFETY PRECAUTIONS

1. To prevent from fire or electrical shock, please don't used a damaged power cord.lf it is out of work, looking for manufacturer or professionals to repair damage.
2. Unplug the power cord when filling the water or cleaning.
3. It is recommended to use the humidifier in the working temperature range of 10ºC to 40ºC.The working relative humidity should not exceed 80%. The water temperature is less than 40ºC.
4. Before using and reusing, you should clean the water tank, and rinse them completely so that there is no residual impurities.
5. Find the ideal spot: Humidifier should be kept in a cool, dry place when not in use.

Documents / Resources

References

• Vewior- Improve your quality of life

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download VEWIOR V01 Manual