Page 1
BT-WR03 H&C RF Wireless Wall receiver Installation manual User guide Manuel d’utilisation watts.eu...
Page 2
It is not possible to pair the receiver in lighting mode or ON/OFF mode. You can access to the general leafl et of the system on watts.eu. In all cases, the receiver is making cooling only in comfort mode. All other modes (Reduced, anti-freeze, auto in Reduced) forbid the cooling regulation.
2. Display description (push button) (red/green) (red/blue) (orange) OFF mode Short press ON/OFF trigger with bip Comfort mode Green fi x with the 2 ouputs opened (without heating, without cooling) Reduced mode Green 50% with the 2 ouputs opened (without heating, without cooling) Antifreeze mode Green 10% with the 2 ouputs opened...
Page 4
4. Installation and RF pairing rules Install and plug the receiver into the following guidelines to guaranty an optimal reception: - The receiver must be put at a minimum distance of 50cm of all others electrical or wireless materials like GSM, Wi-Fi router - Before wiring work related to the receiver must be carried out only when de-energized - Connect your receiver to the power supply.
Page 5
“Eclairage” ou “ON/OFF”. Vous pouvez accéder à la notice générale du système en suivante ce lien : https://watts.fr. Avec un thermostat BT-ST03 RF il est possible de confi gurer le récepteur en mode manuel, chaud, froid, ou automatique. (Se référer à...
2. Description de l’affi chage (bouton poussoir) (rouge/vert) (rouge/bleu) (orange) Mode OFF Appui court Mise en ON/OFF avec bip sonore Confort avec les 2 sorties ouvertes Vert fi xe (sans chauffe, sans froid) Mode Eco avec les 2 sorties Vert 50% ouvertes (sans chauffe, sans froid) Mode Hors gel avec les 2 sorties Vert 10%...
Need help?
Do you have a question about the H&C RF BT-WR03 and is the answer not in the manual?
Questions and answers