Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Babymore DANTE MINI
Summary of Contents for Babymore DANTE MINI
- Page 1 INSTRUCTIONS DANTE MINI COT/ BED DMC: V2/40 2024 < 40m...
-
Page 2: Instructions For Safe Use
• WARNING: Do not use the cot/bed if any part is broken, torn or missing and use only spare parts approved by Babymore. • WARNING: Do not leave anything in the cot or place the cot close to another product which could provide a foothold or present a danger of suffocation or strangulation, e.g. - Page 3 Improper assembly can result in dmage to furniture or cause harm, it is crital to ensure a safy and comfortable end result, Please read all instructions before assmebly. - Unpack all parts and indentify them against the components and fitting lists. - Do not discard any packaging until you are sure you have all the parts and fittings.
- Page 4 Bed Legs 4 |P a g e...
- Page 5 Use cot bed in the correct mode Make sure your cot bed is on the correct setting, and check regularly to avoid any injuries. Top base position The highest position is normally for the first 3 months, or until the baby is able to roll over unaided (approx.
- Page 6 ASSEMBLING THE COT D - Connector Barrel Nut x 4 Step 1 G - Bolts M4 x 4 Step 2 E - Bolts M4 x 12 Phillips Screwdriver (NOT SUPPLIED) 6 |P a g e...
- Page 7 ASSEMBLING THE COT Step 3 Check page 10 B - Bolts M6/50 x 8 adjust base position ! F - Barrel Nut x 8 Step 4 C - Bolts M6/30 x 12 7 |P a g e...
- Page 8 ASSEMBLING THE COT STEP 5 A - Bolts M6/65 x 4 STEP 6 A - Bolts M6/65 x 4 8 |P a g e...
- Page 9 ASSEMBLING THE COT A - Bolts M6/65 x 8 Step 7 D - Connector Barrel Nut x 4 Step 8 9 |P a g e...
- Page 10 ADJUST BASE POSITIONS Top Base Position B - Bolts M6/50 x 4 F - Barrel Nut x 4 Middle Base Position B - Bolts M6/50 x 4 F - Barrel Nut x 4 Lowest Base Position B - Bolts M6/50 x 8 F - Barrel Nut x 8 10 |P a g e...
- Page 11 CONVERTING TO DAY BED / BED Step 1 Step 2 11 |P a g e...
- Page 12 CONVERTING TO DAY BED / BED D - Connector Barrel Nut x 4 12 |P a g e...
Need help?
Do you have a question about the DANTE MINI and is the answer not in the manual?
Questions and answers