Morphy Richards IB75113 Instructions Manual page 7

S7 Rev 2 21/7/04 1:56 PM
Tumble drying
1 Controls must be removed.
2 Gently stretch the blanket back to its
original shape before drying.
3 Tumble dry on the low heat setting,
following the manufacturers instructions
for the required drying time.
Servicing
Examine the blanket and cord frequently
for signs of wear or damage. In the case of
damage, or for routine inspection every 2
years, return the blanket to the service
department (see address below).
A standard service charge (inclusive of
packing and return carriage) is made for
routine inspection where no repair is found
to be necessary.
If the blanket fails to operate, check the
following before returning:
1 Ensure that the plug and socket have not
become disconnected.
2 Check that the supply plug is correctly
connected to the flex.
3 Check the supply fuse and the 3 amp
plug fuse if applicable.
Service department
Waterside Mill
Langham Street
Rosegrove
Burnley
BB12 6AL
Republic of Ireland c/o
Dimpco Ltd
Airport Road
Cloghran
Co. Dublin
Page 7
Helpline
Should you need any advice on using
the product, please contact our helpline,
8:30 - 5:00 Mon - Thurs
8:30 - 4:00 Fri
Tel: 0870 060 2616
7
0870 060 2616
1800 409089