Morphy Richards IB75113 Instructions Manual page 4

S7 Rev 2 21/7/04 1:56 PM
Underblanket without
tie tapes
• Use only as an underblanket and do not
use above the occupant of the bed.
• WARNING: Ensure the blanket is not
folded, rucked or creased. When in
use do not cover with pillows.
Fitting instructions
1 Place the blanket directly on the
mattress, with the control switch end at
the head of the bed.
• The blanket must be secured to the
mattress in the following manner. Place
the blanket directly on the mattress and
ensure that a space of 10-15cm (4-6
inches) is left between the bottom edge
of the blanket and mattress (see diagram
A).
A
10-15 cm
4-6 inches
Page 4
Mattress covers with
elasticated corner tapes
1 Place the mattress cover directly on the
mattress with the control switch end at
the head of the bed.
2 Turn the elastic corners underneath the
mattress to secure in place (see diagram
B).
• Ensure all creases are smoothed out.
B
4