Advertisement
S1 Rev 2
21/7/04
1:43 PM
Washing instructions
WARNING: Check if the blanket is
suitable for machine washing by
checking the label attached to the
blanket.
• Do NOT dry clean -
• Do NOT iron -
WARNING: Before washing ensure
that you detach all the controls from
the blanket.
• Only use in a washing machine with a
drum large enough to take the blanket
without forcing it in.
• Measure the blanket so it can be
stretched back to its original size whilst
wet.
Machine washing
1 Unplug the blanket from the power
socket.
2 Disconnect the control switch and cord
from the blanket by lifting the locking
lever over the raised button and pull
apart. E
3 Wash on the WOOL setting at 40˚C.
4 Gently stretch the blanket back to it's
original shape and size before line drying
WITHOUT using clothes pegs on the
wired area of the blanket. (See
instructions for tumble drying below).
E
Page 7
Hand washing
1 Unplug the blanket from the power
2 Disconnect the control switch and cord
3 Use a mild washing liquid or detergent
4 Immerse the blanket in the water and
5 Squeeze the soapy water through the
6 Rinse the blanket thoroughly in cool
7 Gently stretch the blanket back to its
40º
Sponge washing
1 Unplug the blanket from the power
2 Use a mild washing liquid or detergent
3 Sponge wash dirty areas of the blanket
4 Gently stretch the blanket back to its
Tumble drying
detachable controls can be tumble
dried.
1 Control must be removed.
2 Gently stretch the blanket back to its
3 Tumble dry on the low heat setting,
7
socket.
from the blanket by lifting the locking
lever over the raised button and pull
apart. E
and lukewarm water.
allow to soak for 5-10 minutes.
fabric.
water, gently squeezing the fabric.
WARNING: Do not wring dry.
original shape and size before line drying
WITHOUT using clothes pegs on the
wired area of the blanket.
socket.
and lukewarm water.
avoiding the control switch area.
original shape and size before line drying
WITHOUT using clothes pegs on the
wired area of the blanket.
WARNING: Only blankets with
original shape before drying.
following the manufacturers instructions
for the required drying time.
Advertisement
