Cord Storage; After Use; Care And Maintenance - Morphy Richards IB70540 Instructions Manual

Cord storage

There is a cord storage facility on the
bottom of the cart. With the cleaner on its
heel, pull-out the lower portion and rotate
1/2 a turn. Pull the latch in the centre
downwards to let the upper portion to move
out. Wrap the cable around the two hooks
V. For quick release of the cable rotate the
lower portion back 1/2 a turn.
• Make certain cord storage is returned
and latched to its original position before
use.

After use

1 Switch the cleaner off and unplug from
the socket. Wait until the cleaner has
cooled down completely.
2 Release any steam pressure by pressing
the steam trigger on the handle.
3 Apply the steam safety lock.
4 Remove the filler cap.
5 Empty the water tank. Allow the inside of
the water tank to dry out before replacing
filler cap.
Rinsing the water tank
To clean the water tank fill it with clean
water and shake vigorously. This will release
any limescale deposits that have collected
on the bottom of the tank. Pour the water
out by holding upside down.
10
Descaling
In order to prolong the life of your cleaner
you should descale the steam tank at least
every 6 months.
1 Switch the cleaner off, unplug and allow
to cool.
2 Empty any water out of the tank.
3 Mix the descaler in the measuring jug
using warm water. We recommend using
50gm of citric acid crystals per 1 litre of
water. Citric acid crystals are available
from most pharmacies.
4 Pour 1 litre of the descaler solution into
the tank.
5 Fit the cap and tighten fully.
6 Using the handle, move the steam
cleaner about to swill the solution around
the tank.
7 Leave for 30 minutes.
8 Empty the solution carefully.
9 Rinse the tank with clean warm water,
then empty.
10 Wipe the outside of the cleaner with a
damp cloth to remove all traces of
descaler solution.
Warning: Do not switch on the
heater with the descaling solution
inside.
Care and
maintenance
Your cleaner is manufactured to
withstand normal day-to-day use, but an
occasional wipe over with a damp cloth will
help maintain its good looks. Abrasive
cleaners should not be used.
V
Purchasing parts
Use original parts. Replacement parts
can be purchased from specialist retailers. If
you have difficulty, call the helpline number .