Before First Use - Morphy Richards IB44061 Manual

44061 Rev 1 23/12/04

Before first use

• Before using the toaster for the first time
operate the toaster without bread. Note:
the bread carriage levers fi will not stay
down unless the toaster is plugged in
and the wall switch is on. Ventilate the
room during this period.
• As with all new electric heating elements,
your toaster emits a 'new' smell when it
is first switched on. This is quite normal
and not a cause for concern.
Instructions for use
1 Select the desired level of browning on
the browning control ¤ marked 1 to 9.
The setting required will vary according
to the moisture content and thickness of
the bread. For best results ensure that
the bread slices are of even thickness,
freshness and size. Remember that stale
bread toasts more rapidly than fresh and
thin bread toasts quicker than thick. See
additional points for more information.
2 After selecting the desired level, place
your bread in the slots › and depress
the relevant bread carriage lever fi
downwards until it locks. The left hand
lever operates the two left slots. The
right hand lever operates the right slots.
3 After the set time has been reached the
bread will pop up automatically ready for
removal from the slots. The bread
carriage lever will have returned to its
upper position and the heating element
will have switched off.
• If the bread in your toaster becomes
jammed disconnect your toaster at the
socket, allow it to cool, then remove the
bread.
• When not in use, switch your toaster off
at the mains and remove the plug from
the socket.
WARNING: Do not wrap the cable
around the main body of the appliance
during or after use.
11:39 AM Page 4
4
Using the re-heat button
If your toast has popped up and gone
cold, the toaster offers a re-heat facility. To
use, depress the relevant bread carriage
lever and press the re-heat button ·
immediately. The button will illuminate and
the toaster will operate for a short period
re-heating the bread.
Using the cancel button
If you wish to interrupt the toasting
process, press the cancel button fl.
Using the frozen button
To toast frozen bread do not adjust the
browning control from your normal
preferred setting, place the bread normally
in the bread slots, then depress the relevant
bread carriage lever and press the frozen
button ‚.
Using the bun rack
Place the bun rack and clip it on top of
the toaster ensuring it is securely in place.
Place the buns or other items onto the
bun warmer. Set the browning controls to
the bun warmer position ⁄. Depress both
bread carriage levers until they hold down.
Wait for the toaster to switch off
automatically or press the cancel button to
switch the toaster off before removing the
buns.
WARNING: Take care not to touch
the metal of the bun warmer as it will
be hot.
Do not put more than two buns on the
bun rack at any one time.