Related Manuals for SW-Motech STP.05.590.11100/B
Summary of Contents for SW-Motech STP.05.590.11100/B
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio STP.05.590.11100/B beinhaltet • contains • contient • contiene • contiene STP.05.590.81100/B STP.00.590.10001/B...
-
Page 2: Safety Warning Symbol
~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 STP.05.590.012.11 STP.05.590.010.11 SC.ST.08.025.02.912.088 US.ST.084.02.125 SC.ST.10.055.01.912F.088 SC.ST.10.040.01.912F.088 ø 10,5; DIN 125 US.ST.105.02.125 DB.ST.0250.0105.0140.02 M6 x 50; DIN 912 STP.00.590.007 SC.ST.06.050.01.912.088 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 WARNING: support the engine with a suitable jack. Remove the screws and plastic dowels shown from the side panels on both sides. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Carefully pull the side panels away from the vehicle in order to remove the screws shown. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 (2) (right side of the vehicle ) to the vehicle. WARNING: Use a liquid threadlocker! Do not tighten the screws (3) yet. × × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 10 mm is maintained over the full edge length. Then tighten the screws (3) according to the vehicle manufacturer’s specifications. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 Mount the side panels on both sides of the vehicle using the original screws and plastic dowels. Tighten the original screws (Orig.) according to the vehicle manufacturer's specifications. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 10 Tighten the screws (11) and (12) according to the vehicle manufacturer’s specifications. × × 20 Nm × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 11 (8). Warning: Use liquid threadlocker. Tighten the screws (16) as specified in the mounting instructions. × 10 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 12 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the STP.05.590.11100/B and is the answer not in the manual?
Questions and answers