ORAVA electrical appliances are manufactured according to current state of the engineering and recognized safety-technical rules. Nevertheless, incorrect or improper use, or use contrary to designation may result in the risk of injury or endanger the life of the user or third person, damage to the device and other material values.
Page 3
• The appliance is intended for home and similar indoor use without special focus. • This appliance is intended, in addition to domestic use, for the following uses: - in shops, offices and other similar work environments; - in economic buildings; - in hotels, motels and other residential environments;...
Page 4
1.3 Electrical safety • Before connecting the appliance to the power supply for the first time, make sure that the voltage on the appliance label corresponds to that of the household electrical outlet. • The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz. •...
Page 5
• Do not bend, crush or otherwise expose the power cord of the appliance to mechanical stress or external heat sources. Damage to the power cord may result in electric shock. • When the power cord is damaged, disconnect the appliance from the mains and do not use it again.
Page 6
1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the appliance in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from finger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household appliances.
Page 7
2. Special Safety Instructions. Read carefully! • Electrical equipment is designed and manufactured in such a way as to allow for safe operation and use by persons without a professional qualification. Despite all measures taken by the manufacturer for safe use, handling and use, they carry with them some residual risks and associated potential hazards.
Page 8
Check/Commissioning • Clean the machine before first use as described in the „Commissioning“ or „First use“ section. • Do not clean the device (body with electrical parts and control panel) and the power cord with the plug in a way under running water, which may cause liquid to enter the device.
Page 9
• Do not place the appliance: unstable tables or inappropriate parts of furniture, to unstable decorative floor coverings, on an uneven and dirty surface, on the sealing edge of tables or parts of furniture, near containers with water or other liquids. Warning! •...
Page 10
Warning! • Do not use the appliance in a fire or explosive environment in the presence of flammable substances and vapors, mist or dust, and under atmospheric conditions, where air is easily propagated after ignition. • Do not use the appliance near gas stoves or open flame sources. There is a risk of explosion and/or fire! •...
Assembly Place the rear cover (5) on the motor and screw back the fastening screws (4). Slide the propeller (2) onto the motor shaft (6) and secure it with the propeller mounting screw (3). Slide the front cover (1) onto the back cover (5) (in the correct position) and press the covers together with three clips around the perimeter.
Cleaning and maintenance In order for the fan to work properly, it needs to be cleaned regularly. Switch off the device before cleaning. Cleaning and storage • Store the device in a safe, cool and dry place. • Clean the device with a soft cloth moistened with water. In case of heavy soiling, you can moisten the cloth in a mild detergent solution.
Page 14
Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING Dispose of used packaging material at a municipal waste disposal site.
Need help?
Do you have a question about the SF-100X and is the answer not in the manual?
Questions and answers