TABLE OF CONTENTS ------------------------------------------ SAFETY INFORMATION ------------------------------------- PRODUCT SPECIFICATIONS -------------------------------------------- PRODUCT OVERVIEW --------------------------------------- INCLUDED COMPONENTS ---------------------------------------- PRODUCT INSTALLATION ------------------------------------- USING YOUR SOLAR PANEL ----------------------- CHOOSING A SUITABLE REGULATOR ---------------------------- CONNECTING THE SOLAR PANEL ------------------------ WARRANTY & SUPPORT INFORMATION...
SAFETY INFORMATION SAVE THESE INSTRUCTIONS - This manual contains important instructions that shall be followed during installation and maintenance. Danger of explosion from sparking Danger of electric shock WARNING WARNING: DC (PV) INPUT NOT ISOLATED, NEVER TOUCH UNISULATED CABLE ENDS. •...
Page 4
• The individual KAUSSP80, KAUSSP110, KAUSSP170, KAUSSP210, and KAUSSP280 solar panels are designed specifically for charging 12V rechargeable batteries. Do not use it for other purposes. • Tampering with or modifying the solar panel or its wiring will void the warranty.
PRODUCT SPECIFICATIONS KAUSSP80 Cell type Mono PERC Max power (Pmax) Open circuit voltage (Voc) 25.07V Short circuit current (Isc) 4.35A Front Glass 2mm Tempered glass Frame Anodized aluminum alloy Dimensions 635 x 795 x 5.9mm Weight 3.6kg Maximum system voltage...
Page 6
KAUSSP170 Cell type Mono PERC Max power (Pmax) 170W Open circuit voltage (Voc) 24.62V Short circuit current (Isc) 8.78A Front Glass 2mm Tempered glass Frame Anodized aluminium alloy Dimensions 830 x 1155 x 5.9mm Weight 6.7kg Maximum system voltage 1500VDC Maximum series fuse rating Operation temperature -40ºC - 85ºC...
Page 7
KAUSSP280 Cell type Mono PERC Max power (Pmax) 280W Open circuit voltage (Voc) 44.88V Short circuit current (Isc) 7.87A Front Glass 3.2mm Tempered glass Frame Anodized aluminium alloy Dimensions 1275 x 1134 x 35mm Weight 16kg Maximum system voltage 1500VDC Maximum series fuse rating Operation temperature -40ºC - 85ºC...
INCLUDED COMPONENTS 1 X SOLAR PANEL 4 X M4 SS 306 SELF-LOCKING NUT 4 X M4 SS HEX SOCKET CAP SCREW 8 X SS306 HEX HEAD SELF-DRILLING 4 X SS 306 WASHER TAPPING SCREW 4 X M4 SS HEX SOCKET CAP SCREW 4 X ALUMINUM Z SHAPED BRACKET...
PRODUCT INSTALLATION Step one Remove the solar panel from the box packaging Step two Remove dust from panels: Although our solar panels come with protective packaging, we recommend gently wiping off any dust that may have accumulated during shipping before installation. Use a soft, dry cloth to ensure the panels are clean and ready for optimal performance.
Page 11
Step three Installing the Z shaped brackets onto the solar panel. M4 SS HEX SOCKET CAP SCREW SS 306 SPRING WASHER ANTI VIBRATION PAD Z SHAPED BRACKET SS 306 SRPING WASHER M4 SS 306 SELF-LOCKING NUT...
Page 12
Repeat for each of the four Z shaped brackets.
Page 13
Installing the solar panel to the general mounting surface using 8 x SS306 hex head self-drilling tapping screw. SURFACE OF INSTALLATION...
USING YOUR SOLAR PANEL CHOOSING A SUITABLE REGULATOR Warning: This is an unregulated solar panel - ensure you connect a suitable regulator (available separately) to prevent damage to the battery • These panels are compatible with PWM and MPPT regulators and can be used on the solar input of DC-DC Chargers.
WARRANTY & SUPPORT INFORMATION Need help? For product support or to make a warranty claim, reach out to the KickAss Customer Service team on: warranty@kickassproducts.com.au Alternatively, visit our Customer Support Portal at: https://supportportal.kickassproducts.com.au/...
Page 16
KickAss is a registered trademark of KickAss Products Pty Ltd Designed & imported by KickAss Products Pty Ltd 39 Iris Place, Acacia Ridge, QLD 4110 Australia Made in China...
Need help?
Do you have a question about the KAUSSP80 and is the answer not in the manual?
Questions and answers