Table of Contents
Advertisement
70460 Rev 2
10/8/04
3 To join extension tubes together, slide
one tube into the other until it locks in
place J.
4 Attach the two tubes to the handle of the
hose. Slide the handle into the extension
tube until it locks in place. Some tasks
may be easier with only one tube fitted
or none at all.
5 To connect the desired accessory
directly to the hose handle, slide the
handle into the accessory head until it
locks in place K.
Fitting connector
When using the large floor brush and the
triangular upholstery nozzle, the connector
will need to be fitted before attaching the
extension tube.
1 Push the connector end, holding it
upside down, fully into the brush inlet L.
2 Twist the connector
into place L.
• The fit between the connector and the
tubes and/or handle is tight to ensure no
steam leaks. It is recommended to keep
both parts lubricated with petroleum jelly
to facilitate connecting and
disconnecting.
3 To detach the accessories, press the
release button and pull the items apart.
J
K
10:44 AM
Page 6
1 /
turn, until it locks
2
6
Use of accessories
Steam handle
To avoid spurting of heavy and moist
steam it is recommended to always attach
an accessory to the steam handle.
Large floor brush
Recommended applications include,
carpets, rugs, sealed timber, parquetry,
ceramic tiles and vinyl.
Cotton cloth
Stretch the cloth over the bristles using
the clips provided on the brush head M.
Switch on the steam and move the cloth
covered brush gently over surfaces to be
cleaned. Replace cloth regularly so that
more dirt can be collected and to avoid too
much moisture being applied.
Extra cloths can be ordered by using our
helpline. Alternatively any strong white
cotton cloths may be used.
Triangular upholstery nozzle
The triangular nozzle also has a cotton
sock which fits over the bristles which is
ideal for use on upholstery and bedding.
L
M
Advertisement
Table of Contents
