button for 5 seconds in the power-on state and then release it to reset
the interface to the factory default state.
The external sound module is not responding to MIDI messages
⚫
played by the computer.
Please check if the H2MIDI PRO is correctly selected as the MIDI
‐
output device in your music software.
Please check if you ever set up custom MIDI routing or filtering
‐
through the HxMIDI Tools software. You can try to press and hold the
button for 5 seconds in the power-on state and then release it to reset
the interface to the factory default state.
The sound module connected to the interface has long or disordered
⚫
notes.
This problem is most likely caused by MIDI loopbacks. Please check if
‐
you have set up custom MIDI routing via the HxMIDI Tools software.
You can try to press and hold the button for 5 seconds in the power-
on state and then release it to reset the interface to the factory default
state.
CONTACT
Email: support@cme-pro.com
Web page: www.cme-pro.com
20 / 20
Need help?
Do you have a question about the H2MIDI PRO and is the answer not in the manual?