Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MechMaxx SM-36
Summary of Contents for MechMaxx SM-36
- Page 1 WARRANTY Operator’s Manual www. mechmaxx.com...
-
Page 3: Table Of Contents
GENERAL SAFETY RULES INSPECTION/MAINTENANCE CONTENTS SUPPLIED TO-SCALE HARDWARE ASSEMBLY TRACK RAILS, JOINING GUSSETS, LOG BUNK TRACK RAILS, JOINING GUSSETS, LOG BUNK CONNECTING TRACK SWIVEL JACKS AND SHORT SIDE PLATE WHEELS TRACK RAILS FENDERS TONGUE,COUPLER AND WIRING HARNESS www. mechmaxx.com TABLE OF CONTENTS... -
Page 4: Specifications
Levelling Jacks 6 levelling jacks Jack Load Bearing 3000lbs Height Adjustability 10in Levelling Jacks Foot 7.5" x3.75" Transport Lock Down Kit Finish Galvanized Steel Packing Size 90 x 25 x 20.5 in Weight (N.W./G.W.) 657/743 lbs Warranty 2-Year www. mechmaxx.com SPECIFICATIONS... -
Page 5: Safety
• Check the wheel lug nuts before all trips. Make sure they are torqued properly. • Check the lights. Make sure all the lights work properly. Replace any lights that do not work. • Inspect trailer before all trips for any damaged or loose parts. www. mechmaxx.com SAFETY... -
Page 6: Contents Supplied
Verify all component and hardware quantities are correct prior to assembling the trailer. Cross Beam Stiffening plate Front Cross Beam Swivel Jack Long Side Plate Towing rod seat welding Short Side Plate Swivel Jack Middle axle seat plate 165/70R13 Right Axle Assembly Left Axle Assembly www. mechmaxx.com CONTENTS SUPPLIED... - Page 7 Hitch Ball Coupler Heavy axle seat Tongue Fender Bracket Fender Safety Chain Wiring Harness Cable Clamp Triangle handle M10X40X30 www. mechmaxx.com CONTENTS SUPPLIED...
-
Page 8: To-Scale Hardware
Flangrd Flanged Hex bolt Lock Nut M10 X 30mm 170X Flangrd Flanged Hex bolt Lock Nut M12 X 90mm Flangrd Lug Nut Hex bolt M20 X 100mm Hex bolt Flat washer M5 X 12mm Flat Washer www. mechmaxx.com TO-SCALE HARDWARE... -
Page 9: Assembly
Flanged Hex Bolt Long Side Plate M10 X 30 mm Flanged Lock Cross Beam Nut M10 Stiffening plate Stiffening plate Long Side Plate Cross Beam Flanged Hex Bolt M10 X 30 mm www. mechmaxx.com ASSEMBLY... -
Page 10: Track Rails, Joining Gussets, Log Bunk
Flanged Hex Bolt Long Side Plate M10 X 30 mm Flanged Lock Cross Beam Nut M10 Stiffening plate Stiffening plate Long Side Plate Cross Beam Flanged Hex Bolt M10 X 30 mm www. mechmaxx.com ASSEMBLY... -
Page 11: Connecting Track
SWIVEL JACKS AND SHORT SIDE PLATE Using the hardware listed below, install the jacks and front and rear beams. Flanged Lock Flanged Hex Bolt Nut M10 M10 X 30 mm Swivel Jack Short Side Plate Front Cross Beam Swivel Jack Cross Beam www. mechmaxx.com ASSEMBLY... -
Page 12: Wheels
110 N•m following the pattern shown below. Flanged Lock Flanged Hex Bolt Nut M10 M10 X 30 mm Right Axle 165/70R13 Assembly Middle axle seat Left Axle plate Assembly Heavy axle seat Lug Nut Triangle handle M10X40X30 www. mechmaxx.com ASSEMBLY... -
Page 13: Track Rails
Using the hardware listed below, assemble it onto the track as shown in the image Flanged Hex Bolt Flanged Lock Nut M10 X 30 mm Track components listed in these tables are not included with the trailer package www. mechmaxx.com ASSEMBLY... -
Page 14: Fenders
Fasten a metal fender to each fender bracket using four (4) M8 X 20 mm bolts and four (4) M8 flanged lock nuts. Fully tighten these bolts. Flanged Hex Bolt M8 X 20 mm Fender Fender Bracket Towing rod seat welding Flanged Hex Bolt M10 X 30 mm www. mechmaxx.com ASSEMBLY... -
Page 15: Tongue,Coupler And Wiring Harness
Lock Nut Lock Nut Hitch Coupler Tongue Hex Bolt Cable Clamp M5 X 12 mm Flat Washer M5 Wire Harness Taillight(Red) Sidelights(Yellow) Flanged Hex Bolt M12 X 90 mm Sidelights(Red) Tongue Flanged Hex Bolt M20 X 100 mm www. mechmaxx.com ASSEMBLY... - Page 16 There are 2 cable clamps per short side plate (2) and 4 per long side plate (1) for a total of 8. Cable clamps are installed down the right-hand side of the trailer only. Use the M5 X 12 mm hex bolts, M6 washers, and M6 lock nuts as shown. www. mechmaxx.com ASSEMBLY...
-
Page 17: Table Of Contents 1 Parts Diagram
PARTS DIAGRAM www. mechmaxx.com PARTS DIAGRAM... -
Page 18: Specifications 2 Parts List
Flat pad 8 Hexagon self-locking nut M8 fender Middle axle seat plate Extra heavy axle seat (left) Trip guard Hexagon bolt M12X90 Trailer ball cover 2.5X2 inches Hexagon flange nut M12 Hexagon bolt M20X100 Towing rod seat welding www. mechmaxx.com PARTS LIST... - Page 19 ITEM DESCRIPTION Hexagon self-locking nut M20 Towbar welding Extra heavy axle seat (right) Transport rear anti-tilt hook Front anti-tilt transport hook welded Hexagon flange bolt M10X20 Spring pad 10 Flat pad 10 www. mechmaxx.com PARTS LIST...
- Page 20 info@mechmaxx.com...
Need help?
Do you have a question about the SM-36 and is the answer not in the manual?
Questions and answers