Microphone Module; Removing The Microphone Module - Dell 24 All-in-One Owner's Manual

8. Install the stand.
9. Follow the procedure in
NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE: Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup program.
You must make the appropriate changes again after you replace the system board.

Microphone module

Removing the microphone module

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the system-board
6. Remove the media-card
7. Remove the wireless card.
8. Remove the M.2 2230 solid-state
9. Remove the integrated heat sink
10. Remove the system board.
About this task
The following image indicates the location of the microphone module and provides a visual representation of the removal
procedure.
82 Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
shield.
reader.
drive.
or discrete heat
computer.
computer.
sink, as applicable.