Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Husky C1
Summary of Contents for Husky C1
- Page 1 C1, C2, C4 Home Bar Chiller User Manual To ensure safe operation, please read this user manual thoroughly before use. © Husky International. Husky International reserve the right to change specifications at any time without notice. Images used are for illustration only. Stock not included.
-
Page 2: Table Of Contents
Welcome to your new Husky Thank you for buying this Husky chiller. It has been designed and manufactured for many years of trouble-free service. Operation is very simple, but please take a few minutes to read this user manual. It contains important safety information, and tips to ensure you receive the best possible service from your Husky unit. -
Page 3: All Models
SAFETY INSTRUCTIONS & WARNINGS Before switching on your Husky unit, read the information in this user manual carefully. The user manual contains important observa tions relating to the assembly, operation and maintenance of the unit. -
Page 4: Before Using For The First Time
• Do not use the unit if it is damaged. If you are in any doubt, consult an engineer. • Connection and installation of your Husky unit are to be carried out in strict compliance with the relative instructions in this user manual. -
Page 5: Operating Instructions
Operating Instructions TO OPERATE THE THERMOSTAT The controller is positioned on the inside back wall of the appliance. The settings 0 (MIN) – 7 (MAX) regulate the interior temperature. Setting 0 (or MIN) = lowest setting (warmest internal temperature) Setting 7 (or MAX) = highest setting (coldest internal temperature). INTERIOR LIGHT The interior light may be switched on or off using the rocker switch inside of the cabinet. -
Page 6: Illustration
Access can be obtained to the compressor room at the rear of the unit. WARNING: Parts maybe hot. Ensure the unit is unplugged at the mains before accesssing. -
Page 7: Replacing Led Lights
REPLACING LED LIGHTS 1. Disconnect the chiller from the power supply. 2. Remove the light cover, pull out the wires and remove the LED lights. 3. Install the new LED lights, connect the wires, and replace the light cover. 4. Reconnect the chiller to the power supply. INSTALLING SHELVES Fit the shelf clips to the ladder racks and install the shelves horizontally. -
Page 8: Circuit Diagrams
Circuit Diagrams C1 Home Bar C2 Home Bar C4 Home Bar... -
Page 9: Troubleshooting
Troubleshooting Before calling Technical Support, please check the following points; you may be able to solve any problem yourself. Problem Possible Cause Action The chiller does not The chiller is not plugged in. Connect the plug to the work properly. power supply The plug and/or the power cable Call your supplier or a... -
Page 10: Warranty Card And Service Conditions
Newton, Auckland 1145 Email: arisit.warranties@arisit.com Email: sales2@aristonappliances.co.nz Thank-you for choosing Husky Refrigeration, and we hope you enjoy your new appliance for many years to come. Please read your user manual carefully to ensure proper installation, working operation and maintenance of your new product. - Page 12 Welcome to Husky, the home of smart refrigeration. We are a leading global refrigeration specialist with over 25 years experience in commercial refrigeration for convenience and hospitality professionals. Whatever your requirements, we’re sure to have a good looking energy-efficient model that’s perfect for you.
Need help?
Do you have a question about the C1 and is the answer not in the manual?
Questions and answers