Subscribe to Our Youtube Channel
Related Manuals for Husky C4PRO-H-C-HU
Summary of Contents for Husky C4PRO-H-C-HU
- Page 1 User manual To ensure safe operation, please read this user manual thoroughly before use. © 2016 Husky. Husky reserve the right to change specifications at any time without notice. Images used are for illustration only.
-
Page 2: Table Of Contents
Welcome to your new Husky Thank you for buying this Husky commercial chiller. It has been designed and manufactured for many years of trouble-free service. Operation is very simple, but please take a few minutes to read this user manual. It contains important safety information, and tips to ensure you receive the best possible service from your Husky unit. -
Page 3: Important Notes
SAFETY INSTRUCTIONS & WARNINGS Before switching on your Husky commercial chiller, read the information in this user manual carefully. The user manual contains important observa tions relating to the assembly, operation and maintenance of the unit. -
Page 4: Before Using For The First Time
• Do not use the unit if it is damaged. If you are in any doubt, consult an engineer. • Connection and installation of your Husky unit are to be carried out in strict compliance with the relevant instructions in this user manual. -
Page 5: Troubleshooting
The chiller is not plugged in. Connect the plug to the The chiller does not work properly. power supply Call Husky (see back page) The plug and/or the power cable are faulty. or a qualified engineer. Replace the fuse with one of The fuse has blown. -
Page 6: Standard Range C4Pro, C5Pro, C8Pro, & C10Pro
Technical Support: 01455 555340 (UK) Standard Range C4PRO, C5PRO, C8PRO, & C10PRO Operating Instructions TO OPERATE THE ELECTRONIC THERMOSTAT The thermostat has been pre-set, and in most cases it is not necessary to adjust the settings. When the unit is operating normally, the display will show the current temperature. To display the set temperature press the button. -
Page 7: Exploded Diagram
Technical Support: 01455 555340 (UK) Exploded Diagram... - Page 8 EASY MAINTENANCE ACCESS QUALIFIED ENGINEERS ONLY. Husky chillers are designed for easy maintenance. One feature is that the compressor, condenser and condenser fan are mounted on an easily- accessible sliding tray. To access this sliding tray, open the door(s) fully and loosen the two screws (which have now become accessible) on the top on either side of the kick plate –...
-
Page 9: Circuit Diagrams
Technical Support: 01455 555340 (UK) Circuit Diagrams C4PRO & C5PRO Standard models, no canopy C4PRO & C5PRO Standard models with canopy C8PRO & C10PRO Standard models, no canopy... - Page 10 Technical Support: 01455 555340 (UK) Standard Range C4PRO, C5PRO, C8PRO, & C10PRO Circuit Diagrams C8PRO & C10PRO Standard models with canopy C8PRO & C10PRO Standard models with door heater, no canopy C8PRO & C10PRO Standard models with door heater and canopy...
-
Page 11: Wiring Diagram
Technical Support: 01455 555340 (UK) Wiring Diagram ELECTRONIC THERMOSTAT SF-102SBQ-4... -
Page 12: How To Contact Husky
Welcome to Husky, the home of smart refrigeration. We are a leading global refrigeration specialist with over 50 years experience in commercial refrigeration for convenience and hospitality professionals. Whatever your requirements, we’re sure to have a good looking energy-efficient model that’s perfect for you.
Need help?
Do you have a question about the C4PRO-H-C-HU and is the answer not in the manual?
Questions and answers