Huawei honor JAT-L29 Manual
![]()
Know Your Device
Before using the device, familiarize yourself with its basic operations.
- To power on your device, press and hold the power button until the screen turns on.
- To power off your device, press and hold the power button, and then touch
. - To restart your device, press and hold the power button, and then touch
. - Press and hold the power button for 10 or more seconds to forcibly restart your device.
![Huawei - honor JAT-L29 - Know Your Device Know Your Device]()
| Headset jack | | Fingerprint scanner |
| Micro-USB port | | Tips App |
| Power button | | Volume button |
Check out the pre-installed Tips app and master all the great features on your device.
Getting Started
![information]()
- Do not insert or remove the SIM card when your device is powered on.
- Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.
![]()
- Be careful not to scratch your device or hurt yourself when using the eject pin.
- Store the eject pin out of the reach of children to prevent accidental swallowing or injury.
![warning]()
- Do not use cut or modified SIM or microSD cards with your device as these may not be recognized and could damage the card tray (slot).
- If your SIM card does not match your device, please contact your carrier.
![Huawei - honor JAT-L29 - Setting Up Your Device Setting Up Your Device]()
Follow the instructions in the figures above to set up your device. Please use the eject pin included.
Dual Card Dual Standby Single Pass
Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously.
- When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider.
- When you are using SIM card 1's data service, SIM card 2's data service will be disabled.
Your device's single pass feature helps reduce power consumption and increase your device's standby time. It is not related to your service provider's network conditions.
You can enable call forwarding between SIMs on the device to avoid missed calls.
If you encounter any problems while using your device, you can obtain help from the following resources:
- Visit http://www.hihonor.com to view device information and other information.
- Visit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region.
- You can find service hotlines, retailer addresses, service policies and more information for your local region in HiCare.
Go to Settings and touch System > About phone > Legal to view legal information for your product.
Go to Settings and touch System > About phone > Legal > Safety information to view safety information for your product.
Go to Settings and touch System > About phone > Authentication info to view regulatory information for your product.
Go to Settings and touch System > Certification logos to view more information on certification logos for your product.
All pictures and illustrations in this guide, including but not limited to the device color, size, and display content, are for your reference only. The actual device may vary. Nothing in this guide constitutes a warranty of any kind, express or implied.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Huawei honor JAT-L29 Manual
Need help?
Do you have a question about the honor JAT-L29 and is the answer not in the manual?
Questions and answers