Download Print this page
Waterway SPC-3 VP Installation Instructions Manual
Waterway SPC-3 VP Installation Instructions Manual

Waterway SPC-3 VP Installation Instructions Manual

Super hi-flo suction for self-contained spas

Advertisement

Quick Links

SUPER HI-FLO SUCTION FOR SELF-CONTAINED SPAS
VGBA
2017
Read and follow all instructions in this owner's manual and on the equipment. Failure to follow instructions can cause
severe injury and/or death.
SOFA INSTRUCTIONS
When installing and using this equipment, basic safety precautions shall always be followed, including the following: IMPORTANT
SAFETY INSTRUCTIONS. READ, FOLLOW, AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS.
Any modification that increases the flow rate of the circulation system shall require re-evaluation of the cover/grate and sump to
ensure that the flow rating of the Suction Outlet Fitting Assembly (SOFA) is not exceeded.
Missing, broken, or cracked cover/grates, sumps, mud-frames, or any other SOFA component shall be replaced before bathers are
allowed to use the pool.
Loose cover/grates shall be reattached before bathers are allowed to use the pool.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
WARNING - SUCTION ENTRAPMENT HAZARD
Suction in suction outlets and/or suction outlet
covers which are damaged, broken, cracked,
missing, or unsecured can cause severe injury and/
or death due to the following entrapment hazards:
Hair Entrapment: Hair can become entangled in suction outlet cover.
Limb Entrapment: A limb inserted into an opening of a suction outlet
sump or suction outlet cover that is damaged, broken, cracked, missing,
or not securely attached can result in a mechanical bind or swelling of
the limb.
Designed,
Engineered &
Manufactured
in the USA.
©2024 Waterway Plastics
INSTALLATION INSTRUCTIONS
For Model Number: SPC-3 VP • SPC-3M VP
WARNING:
IMPORTANT SAFETY INSTRUCTIONS. READ, UNDERSTAND, AND FOLLOW ALL WARNINGS
AND INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
USE ONLY GENUINE WATERWAY REPLACEMENT PARTS.
2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
www.waterwayplastics.com • waterway@waterwayplastics.com
Body Suction Entrapment: A negative pressure applied to a large
portion of the body or limbs can result in an entrapment.
Evisceration / Disembowelment Entrapment: A negative pressure
applied directly to the intestines through an unprotected suction
outlet sump or suction outlet cover which is damaged, broken, cracked,
missing, or unsecured can result in evisceration / disembowelment
entrapment.
Mechanical Entrapment: There is potential for jewelry, swimsuit,
hair decorations, finger, toe, or knuckle to be caught in an opening of a
suction outlet cover resulting in mechanical entrapment.
810-0262.1124

Advertisement

loading
Need help?

Need help?

Do you have a question about the SPC-3 VP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Waterway SPC-3 VP

  • Page 1 SUPER HI-FLO SUCTION FOR SELF-CONTAINED SPAS INSTALLATION INSTRUCTIONS For Model Number: SPC-3 VP • SPC-3M VP VGBA WARNING: IMPORTANT SAFETY INSTRUCTIONS. READ, UNDERSTAND, AND FOLLOW ALL WARNINGS 2017 AND INSTRUCTIONS. SAVE THESE INSTRUCTIONS. Read and follow all instructions in this owner’s manual and on the equipment. Failure to follow instructions can cause severe injury and/or death.
  • Page 2 The SPC-3 VP & SPC-3M VP fitting is rated at 251 GPM when 2 1/2” wall fitting 215-3610 or 215-3630 is used respectively, and 180 GPM when 2” wall fitting 215-3620 or 215-3640 is used respectively. If the fitting is missing or broken, replace with a fitting of equivalent rating or higher.
  • Page 3 • Do not exceed the safe flow rating of SOFAs as listed. • All SOFAs should be installed in accordance with Waterway installation instructions. • Under no condition should SOFA special flow rating be exceeded while the pool is open.
  • Page 4: Installation Instructions

    SPC-3 VP SPA WALL 642-3620 215-3620 215-3610 INSTALLATION INSTRUCTIONS 642-383X V 1. Locate and cut a 3 1/4” hole in a vertical wall SPC-3M VP of the spa. Be sure the area located is flat and spa laminate thickness is uniform.
  • Page 5: Warranty

    SPC-3M VP Head Loss Curve Flow Rate (GPM) SPC-3 VP Head Loss Curve Flow Rate (GPM) WARRANTY For product registration visit: www.waterwayplastics.com. For Warranty questions or claims please contact point of purchase. ©2024 Waterway Plastics 810-0262.1124...
  • Page 6 PVC Pipe: 2 1/2" or 2" Minimum Length Before Reduction: 16" Use Only Supplied Wall Fitting: (215-3610 & 215-3620) for model SPC-3 VP and (215-3630 & 215-3640) for model SPC-3M VP. NOTE: Use of field fabrication sumps is not permitted ©2024 Waterway Plastics...

This manual is also suitable for:

Spc-3m vp