DALCNET SLIM-2CC-CASAMBI Device Manual

Led dimmer

Advertisement

FEATURES
CASAMBI LED DIMMER
Power supply (DC IN): 12-24-48 Vdc
Constant Current outputs (L1, L2) for dimmable Spotlight and LED module
WHITE, MONOCHROME, TUNABLE WHITE and DIM-to-WARM Light Control
Pulse Width Modulation (PWM) outputs dimming up to 1.6 A (total)
Local command: up to N°2 Normally Open (N.O.) pushbuttons
Remote control via Bluetooth Low Energy (CASAMBI
Device configuration via CASAMBI
Constant Current output level (via Fixture)
o
Transition Parameters (Fade)
o
Soft ON/OFF
Soft brightness dimming
Extended temperature range
100% Functional test
PRODUCT DESCRIPTION
SLIM-2CC-CASAMBI is a 2-channels Constant Current (CC) PWM modulated LED dimmer, which can be powered from a SELV
constant voltage (12 ÷ 48) Vdc power supply. The dimmer is suitable for driving loads such as Spotlight or white, single-colour,
Tunable White, Dim-to-Warm, LED modules at constant current and can be controlled remotely via Bluetooth through the
CASAMBI
©
mobile application or locally by means two N.O. pushbuttons.
SLIM-2CC-CASAMBI can deliver a maximum total output current of 1.6 A (800 mA maximum for each output channel) and has the
following detections and protections: open-circuit and short-circuit internal protection, over-power and under-power protections,
reverse polarity protection and input fuse protection.
SLIM-2CC-CASAMBI enables you to make not only simple brightness adjustments but also more dynamic lighting control systems.
This is made possible through the creation of multiple scenarios, animations, timers, daylight controls, and more.
Through the CASAMBI
©
mobile application and smartphones equipped with Bluetooth technology, it is possible to configure multiple
parameters, including maximum output current and maximum/minimum brightness levels. CASAMBI
downloaded free of charge from the Apple APP Store and Google Play Store.
⇢ For the most up-to-date manual, please consult our website
⇢ For the correct functioning of the CASAMBI
https://support.casambi.com/support/home
DALCNET S.r.l.
36077 Altavilla Vicentina (VI) – Italy
Via Lago di Garda, 22
SLIM-2CC-CASAMBI
Device Manual
©
mobile app)
©
mobile application, parameters can be set:
www.dalcnet.com
©
mobile app, consult the forum on the Casambi website:
©
mobile application can be
or QR Code.
Tel. +39 0444 1836680
www.dalcnet.com
Rev. 26/11/2024 - Pag. 1/14
Made in Italy
info@dalcnet.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLIM-2CC-CASAMBI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DALCNET SLIM-2CC-CASAMBI

  • Page 1 N.O. pushbuttons. SLIM-2CC-CASAMBI can deliver a maximum total output current of 1.6 A (800 mA maximum for each output channel) and has the following detections and protections: open-circuit and short-circuit internal protection, over-power and under-power protections, reverse polarity protection and input fuse protection.
  • Page 2: Product Code

    Short-Circuit Protection ✔ Open-Circuit Protection Table 2: Detection and Protection functionalities REFERENCE STANDARDS SLIM-2CC-CASAMBI follows the regulations shown in the table below. STANDARD TITLE EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN 61547 Equipment for general lighting purposes –...
  • Page 3: Technical Specifications

    SLIM-2CC-CASAMBI Device Manual Made in Italy TECHNICAL SPECIFICATIONS Values Unit of Description Name Note Measure INPUT (Power Supply DC IN) Nominal Supply Voltage Supply Voltage range 10.8 ÷ 52.8 IN-RNG Efficiency at full load > 95 Standby power absorption < 0.5...
  • Page 4: Installation

    Power Supply wiring: connect a 12-24-48 Vdc constant voltage SELV power supply (depending on the nameplate data of the LED load) to the "+" and "-" terminals of the DC IN terminal. Remote control pairing: power ON the SLIM-2CC-CASAMBI and follow the pairing instructions provided on CASAMBI ©...
  • Page 5 UPPLY WIRING SLIM-2CC-CASAMBI can be powered by a 12 Vdc, 24 Vdc or 48 Vdc constant voltage SELV power supply, depending on the operating voltage of the LED load. Once the load and Remote Control are connected, wire the power supply to the "+" and "-"...
  • Page 6 Input 1, 2 Brightness adjustment (Dimming) Table 8: Pushbutton functionality for Control a Group" By default, the N.O. pushbutton is set as “Control a luminaire” and controls the output of the SLIM-2CC-CASAMBI. DALCNET S.r.l. Tel. +39 0444 1836680 36077 Altavilla Vicentina (VI) – Italy www.dalcnet.com...
  • Page 7 SLIM-2CC-CASAMBI Device Manual Made in Italy “C ” USHBUTTON UNCTIONALITY FOR ONTROL SCENE In Control scene mode, the buttons take over brightness adjustment and ON/OFF of the programmed scenario. ACTION INPUT # FUNCTION Quick press ON/OFF of the configured Scene...
  • Page 8 Android/iOS smartphones or tablets. ROFILE APPING IXTURES SLIM-2CC-CASAMBI supports the following fixtures (selectable by CASAMBI © mobile app) that provides sliders of the light intensity for the output channels. Profile Name...
  • Page 9 Figure 7: Flickering Perception Threshold THERMAL CHARACTERIZATION Operating Window Figure 8 shows the maximum output current values that can be provided by the SLIM-2CC-CASAMBI as a function of the operating temperature (or ambient temperature, T ) of the operation, summarized below: ...
  • Page 10: Dimming Curves

    SLIM-2CC-CASAMBI Device Manual Made in Italy DIMMING CURVES Linear Dimming curves Figure 9 shows the dimming curves 1000 provided SLIM-2CC-CASAMBI Iout=800mA dimmer, according to the maximum output current set. Iout=700mA Output Current (and corresponding Iout=500mA curve) can be selected by fixture settings on CASAMBI ©...
  • Page 11: Technical Notes

    SLIM-2CC-CASAMBI Device Manual Made in Italy TECHNICAL NOTES NSTALLATION WARNING! Installation and maintenance should always be conducted in the absence of DC voltage. Before continuing with the installation, adjustment, and connection of the device to the power supply, make sure that the voltage is disconnected from the system.
  • Page 12: Legal Notes

    ERMS OF Dalcnet Srl (hereinafter referred to as "the Company") reserves the right to make changes to this device, in whole or in part, without prior notice to the customer. Such changes may affect technical aspects, functionality, design, or any other element of the device. The company is not required to notify you of such changes and that your continued use of the device will constitute your acceptan ce of the changes.
  • Page 13 Made in Italy CASAMBI CASAMBI © is the official application through which it is possible to configure, in addition to the functions of the SLIM-2CC-CASAMBI, also all the different CASAMBI © products equipped with BLE technology. CASAMBI © mobile app can be downloaded free of charge from the Apple App Store and Google Play Store.
  • Page 14 © NPAIR FROM ETWORK If SLIM-2CC-CASAMBI is already connected to a network for which you don't have the credentials and you wish to associate it with a new network, please follow the instructions provided in the CASAMBI © mobile app, "Nearby Devices" section.

Table of Contents