BMW SERIE 3 SEDAN 2005 Owner's Manual page 131

1 2
Indication
The driving stability control systems,
including ABS and the Flat Tire Monitor,
have failed, refer also to page
Indication
The driving stability control systems,
including ABS and the Flat Tire Monitor,
have failed, refer also to page
Light up in yellow and red:
> Tire is deflated
> Flat Tire Monitor not initialized
Light up in yellow:
Flat Tire Monitor failed. Punctures are
not indicated
Lights up in red:
> Transmission limp-home program
active with restricted range of gears,
possibly with reduced acceleration.
Gears can be engaged without
depressing the brake pedal
Lights up in yellow:
>
Automatic selector lever locked:
Selector lever locked in position P
with engine running and brake pedal
depressed or
> Brake signal malfunctioning: gear
can be engaged without depressing
the brake pedal
130
Online Edition for Part-No. 01 41 0 159 256 - © 03/05 BMW AG
Cause
*
in Canadian models
60
*
in Canadian models
60
What to do
You can continue your journey. Drive
cautiously and think well ahead. Avoid
situations that require full braking. Have
the system checked as soon as possi-
ble.
You can continue your journey. Drive
cautiously and think well ahead. Avoid
situations that require full braking. Have
the system checked as soon as possi-
ble.
Carefully bring the car to a stop. Comply
with the additional information starting
on page 61.
Initialize Flat Tire Monitor, refer to
page 61.
Have the system checked.
You can continue your journey, but
moderate your speed and exercise due
caution. Have the system checked with-
out delay.
Always press the brake pedal to engage
a gear.
Have the system checked as soon as
possible.
Overriding selector lever lock, refer to
page 41.
To engage a gear while the vehicle is at
a standstill, always step on the brake
pedal. Before leaving the vehicle, move
the selector lever to position P and
switch off the engine.