Switching On And Off; Selecting Sound Pattern - BMW ONBOARD COMPUTER Owner's Manual

DSP sound system
Digital Sound Processing (DSP) assures
an optimum level of audio reproduction
quality by means of spatial simulation
and also by providing equalizer func-
tions.
You can choose from the following
settings:
> "Demo":
Sound pattern
> "Memo":
Selection between three specified
and three individually settable sound
patterns with influence on the 3D
sound and Hall effect
> "On / Off":
Resets sound settings to midrange
values.
The functions "Room/Echo" and
"Set" are only available, if an indi-
vidual sound memory is selected
(memory 1 – 3).<
*

Switching on and off

1. Select "MENU"
2. Select "DSP"
3. Select "On / Off".
Setting "Off" sets the sound setting
to a mean value.
To exit DSP, press again:
You can use this menu to access the
DSP functions described in the
following section.

Selecting sound pattern

1. Select "Demo".
The pre-defined sound patterns,
Concert Hall, Jazz Club and Cathe-
dral, are activated one after the other
for the music currently playing
2. Press the right-hand rotary button.
The presentation of the sound
patterns is interrupted. The previous
pattern is reactivated.
To activate one of the preset sound
patterns or one of the sound patterns
you have created, refer to the following
page.
Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG
61n