Park Distance Control (Pdc) - BMW M5 2001 Manual

Park Distance Control (PDC)

84n
The concept
The PDC assists you when you are
parking. A signal warns you of the real
distance to an obstacle. To do this, four
ultrasonic sensors in the front and rear
bumpers measure the distance to the
nearest object. The monitoring range
for the front and both rear corner
sensors extends approx. 2 ft (60 cm)
beyond the bumper. The range for the
center rear sensors extends approx. 5 ft
(1.50 meters).
Automatic operation
The system starts to operate automati-
cally approx. one second after you
select reverse or move the selector
lever into the "R" position with the igni-
tion key in position 2.
*
Turn on manually
Press the button (arrow), the indicator
lamp comes on.
After driving more than approx. 160 ft
(50 meters) or exceeding approx.
20 mph (30 km/h), the system switches
off and has to be switched back on
when you want to use it again.
Turn off manually
Press the button again.
Acoustic signals
The distance to an object is indicated
by a high beeping sound in the front
and a low beeping sound in the back.
As the distance between the vehicle
and object decreases, the intervals
between the tones become shorter.
A continuous tone indicates the pres-
ence of an object less than 1 ft (30 cm)
away.
The warning signal will be canceled
after approx. 3 seconds if the distance
to the obstruction remains constant
during this time (if you are moving
parallel to a wall, for instance).
Malfunction in the PDC system:
The indicator lamp flashes and a brief
continuous signal tone is heard
> when the PDC system is actived via
the button
> when you first select reverse or move
the selector lever into the "R" posi-
tion after switching on the ignition
> when there is a malfunction while the
PDC system is active.
Switch the system off and have the
cause of the malfunction corrected by
your BMW center.
Online Edition for Part No. 01 41 0 155 429 - © 09/00 BMW AG