Obd Interface Socket - BMW M5 2001 Manual

OBD interface socket

Access to the interface socket for the
On-Board-Diagnostics (OBD): lift the
cover (arrow) next to the steering
column.
The purpose of the OBD (Onboard
Diagnostic) system is to assure proper
emission control system operation for
the vehicle's lifetime by monitoring
emission-related components and
systems for deterioration and malfunc-
tion.
An illuminated indicator informs
you of the need for service, not
of the need to stop the vehicle.
However, the systems should be
checked by your BMW center at the
earliest possible opportunity.
Under certain conditions, the indicator
will blink or flash. This indicates a rather
severe level of engine misfire. When
this occurs, you should reduce speed
and consult the nearest BMW center as
soon as possible. Severe engine misfire
over only a short period of time can
seriously damage emission control
components, especially the catalytic
converter.
Warning lamp: Service Engine
Soon for Canadian models
When the filler cap is not properly
tightened, the OBD system can
detect the vapor leak and the indicator
will light up. If the filler cap is subse-
quently tightened, the indicator should
go out within a few days.<
Online Edition for Part No. 01 41 0 155 429 - © 09/00 BMW AG
153n