Seat And Mirror Memory - BMW M3 2002 Owner's Manual

Safety belts
46n
If the safety belt system has been
subjected to the stresses involved
in an accident or otherwise damaged:
Have the entire safety belt mechanism
replaced by your BMW center,
including the safety belt tensioner. In
addition, have your BMW center
inspect the safety belt anchors. If a
child-restraint system was in the
vehicle during an accident, consult the
manufacturer's instructions regarding
replacement.<

Seat and mirror memory

You can store and call up three different
driver's seat and exterior mirror posi-
tions.
Memory will not retain the adjust-
ments made to the lumbar
supports or the width of the back-
rests.<
To store
1. Ignition key in position 1 or 2
2. Adjust your seat and outside mirrors
to the desired position
M
3. Press the EMORY button: the indi-
cator lamp in the button lights up
4. Press memory button 1, 2 or 3, as
desired. The indicator lamp goes out.
To select a stored setting
Driver's door open after unlocking or
ignition key in position 1:
> Briefly press memory button 1, 2 or 3,
as desired.
Movement stops immediately when
one of the seat adjustment or
memory buttons is activated during
the adjustment process.
With the driver's door closed and the
ignition key either removed or in posi-
tion 0 or 2:
> Maintain pressure on the desired
memory button (1, 2 or 3) until the
adjustment process is completed.
M
If you press the EMORY button
accidentally: press the button
again; the indicator lamp goes
Do not select a memory position
while the vehicle is moving. If you
do so, there is a risk of accident from
unexpected seat movement.<
Online Edition for Part No. 01 41 0 156 237 - © 09/01 BMW AG
out.<