The Bmw Maintenance System - BMW M3 2001 Manual

Table of Contents

Advertisement

The BMW Maintenance System

The BMW Maintenance System has
been designed as a reliable means of
providing maximum driving and operat-
ing safety – and as cost-effectively as
possible for you.
Please keep in mind that regular main-
tenance is not only necessary for the
safety of your vehicle, but also plays a
significant role in maintaining the resale
value of the vehicle.
Service Interval Display
Advanced technology is employed to
calculate the optimal maintenance
intervals. These are then indicated in
the Service Interval Display. While
conventional systems rely on distance
traveled alone to determine when
service is due, the BMW Maintenance
System has for years considered the
actual conditions under which the
vehicle operates, because miles can be
traveled in many different ways: for
example, 62,000 miles (100,000 km) of
short-distance driving are not equal to
the same 62,000 miles (100,000 km) of
long-distance travel. In response to this
fact, the BMW Maintenance System
monitors operating conditions as the
basis for determining the service inter-
vals for your vehicle, it includes the
Engine Oil Service and Inspections I
and II.
Determining the maintenance intervals
according to the actual loads on the
vehicle covers every kind of operating
situation. Those who drive fewer than
6,000 miles (10,000 km) per year
should, nevertheless have their oil
changed every 2 years at the most, no
matter what the Service Interval Display
indicates, since engine oil ages over
time, regardless of loading.
Service and Warranty Information
Booklet (US models)/Warranty
and Service Guide Booklet
(Canadian models)
For additional information on required
maintenance intervals and procedures,
please refer to the Service and
Warranty Information Booklet (US
models), or the Warranty and Service
Guide Booklet (Canadian models).
As a precaution against rust, it might be
a good idea to have the body checked
for damage from rocks or gravel at the
same time, depending upon operating
conditions.
Have your BMW center do the
maintenance and repair.
Your BMW center is always "up to date"
on the latest maintenance work and
repair techniques and equipped with
the required special tools. In addition,
checking parts known from experience
to be subject to wear is a permanent
part of the maintenance specifications.
Be sure that all maintenance work is
confirmed in the Service and Warranty
Information Booklet (US models), or in
the Warranty and Service Guide Book-
let (Canadian models). These entries
are your proof that the vehicle has
received regular maintenance. They
are also a requirement for warranty
claims.<
Online Edition for Part No. 01 41 0 155 433 - © 08/00 BMW AG
127n

Advertisement

Table of Contents
loading

Table of Contents