Brakes; Mirrors; Spring Preload - BMW K 1600 GT Rider's Manual

The adjusting screw is easi-
4
er to turn if you push the
clutch lever forward.
66
The anti-hopping function
of the clutch can cause the
clutch lever to pulsate briefly in
some situations (e.g. variation of
load).

Brakes

Adjusting handbrake lever
z
Changing the position of
the brake-fluid reservoir can
allow air to penetrate the brake
system.
Do not turn the handlebar fitting
on the handlebar.
Attempting to adjust the
handbrake lever while rid-
ing the motorcycle can lead to
accidents.
Do not attempt to adjust the
handbrake lever unless the mo-
torcycle is at a standstill.
Turn adjusting screw 1
clockwise to increase the span
between the brake lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the brake
lever and the handlebar grip.
The adjusting screw is easi-
er to turn if you push the
handbrake lever forward.

Mirrors

Adjusting mirrors
Pivot the mirror to the correct
position by pressing gently at
the edge.

Spring preload

Setting
It is essential to set spring pre-
load of the rear suspension to
suit the load carried by the mo-
torcycle. Increase spring preload
when the motorcycle is heavily
loaded and reduce spring preload