Slipstream Deflector - BMW K 1600 GT Rider's Manual

Hide thumbs Also See for K 1600 GT:
Table of Contents

Advertisement

4
62
Press top section of button 1
to raise the windscreen.
Press bottom section of but-
z
ton 1 to lower the windscreen.
Switch off the ignition.
The windscreen automatically
moves to the bottom limit posi-
tion.
If the windscreen encounters
resistance before it reaches
its limit position the pressure-
sensitive finger guard system
goes active. The windscreen
is stopped and raised slightly.
After a delay of a few seconds
the windscreen again attempts
to move to the bottom limit
position.
There is no guarantee that the
pressure-sensitive finger guard
system will function correctly if a
windscreen that does not have
BMW approval is installed.
Under these circumstances:
Before switching off the igni-
tion always check that there is
nothing to obstruct movement
of the windscreen.

slipstream deflector

Adjusting slipstream
deflectors
Attempting to adjust the
slipstream deflectors while
the motorcycle is being ridden
can lead to accidents.
Do not attempt to adjust the slip-
stream deflectors unless the mo-
torcycle is at a standstill.
Turn slipstream deflector 1 in
or out to adjust the airflow for
the rider. In this process, note
the outer limit stop.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents