Removing Rear Wheel - BMW K 1300 R Rider's Manual

with BMW Motorrad Integral
ABS II OE
The cable of the ABS
sensor could chafe through
if it comes into contact with the
brake disc.
Make sure that the ABS sensor
cable is routed correctly.
Carefully route the ABS cable.
Make sure that the ABS
sensor cable is clipped into
holders 1.
Install securing screws 2.
Front brake caliper to
wheel carrier
30 Nm
Remove the adhesive tape
from the wheel rim.
Firmly pull the handbrake lever
until the pressure point is per-
ceptible, and repeat this opera-
tion several times.
Position covers 2 on left and
right.
Install screws 1 on left and
right.

Removing rear wheel

without centre stand
Place the motorcycle on an
auxiliary stand; BMW Motorrad
recommends the BMW Motor-
rad rear-wheel stand.
Installing rear-wheel stand
( 118).
8
113
z
OA