Helmet Holder - BMW K 1200 GT Rider's Manual

4
76
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
z
motorcycle will be pushed off its
stand.
Always make sure that the
motorcycle is stable and firmly
supported.
Slide the rear seat underneath
the front seat and push it down
firmly at the rear.
The seat engages with an aud-
ible click.

Helmet holder

Securing helmet to
motorcycle
Remove the rear seat (
Use the wire rope available as
an optional accessory to secure
the helmet to helmet holder 1.
73)
The helmet catch can
scratch the panelling.
Make sure the lock is out of the
way when you hook the helmet
into position.
Secure one end of the wire
rope, pass the wire rope
through the helmet and slip the
other end over holder 1.
Install the rear seat ( 75)