System; Precondition; Activating The Communication System; Connecting Helmets - BMW K 1200 LT Operating Instructions Manual

Precondition

2
The BMW V.O.I.C.E. II com-
munication system operates
8
with BMW stereo helmet
inserts or helmet inserts from
J&M Corporation. You also
need a compatible spiral
cable. Advice is available from
trade outlets or from your
authorised BMW motorcycle
dealer.
Using communication fa-
cilities can distract your
attention from the traffic and
lead to accidents.
Use the communication facili-
ties only when the traffic situa-
tion enables you to do so with-
out risk.c
Activating the commu-
nication system
Opening and closing the
radio compartment and
adjusting settings at the con-
trol unit can distract your at-
tention from the traffic and
lead to accidents. Do not at-
tempt to operate the control
unit while riding.c
• Open the lid of the radio
compartment.
• Switch on the ignition.
• Switch on the radio.
» Display shows On .
» The communication system
is active.
• Close the lid of the radio
compartment.
If you want to use the
communication facilities
without using any of the radio
functions, repeatedly press
the *CD button on the radio
until the radio display shows
INTERCOM.c

Connecting helmets

• Switch off speed-dependent
volume control at the radio
(see the operating instruc-
tions for the radio).
• Use spiral cable 2 to connect
cable 1 of the rider's helmet
to front-helmet socket 3.