WAC Lighting LEDME PA-3636-BK-C Quick Start Manual

LEDME SHOWCASE LIGHTING
36VDC power adapter, MTB power splitter (four port)
DESCRIPTION
The LEDme series 36VDC power adapter and MTB power splitter are matched with WAC display cabinet lights, and can be quickly installed through standard DC plugs,
suitable for museum display cabinets and high-end art exhibitions and other places.
Product characteristics
 LED display cabinet light dedicated driver electrical appliances, used in
conjunction with lighting fixtures.
 The system consists of two parts: a 36VDC power adapter and an MTB
power splitter;
 The MTB power splitter needs to be used in conjunction with a 36VDC
power adapter and must be ordered together.
 The MTB power splitter adopts constant current output, which can support
multiple ports for simultaneous output and hot swapping.
 The MTB power splitter is compatible with dimming, please refer to the
product model list for details.
 IP20
36VDC Power Adapter
Model
PA-3636-BK-C
220-240VAC，50Hz
1. This model includes: ① power adapter, ② 220-240VAC input line and its
plug③ Provide a 36VDC output line and DC quick connect plug to power
the MTB power splitter.
2. Each 36VDC power adapter can drive up to one MTB power splitter
Input Output
36VDC，36Wmax
reserve the right to conduct periodic design updates on our products.
Product specifications
Material:
The 36VDC power adapter adopts a delicate plastic shell;
The MTB power splitter adopts a metal shell and is equipped with an efficient constant
current dimming module.
Electrical:
The power adapter can input 220-240VAC/50Hz, with a maximum power
of 36W and an output voltage of 36VDC; The MTB power splitter has a 36VDC input,
multiple constant current outputs, and a typical voltage drop of 12V, suitable for
supplying power to LED display cabinet lights.
Color: Black (BK)
MTB Power Splitter
Model
MTB-400MA04D-BK 36VDC
MTB-500MA04D-BK 36VDC
1. The MTB power splitter is compatible with two dimming methods, and only one can be used for
each dimming. If not used, it needs to be adjusted to the maximum value. Please refer to the
installation manual for details.
2. 0 to 10 v dimmer need to advance with the dimming system matching test.
Input Output
4 output terminals, 400mA constant
current (5W); Simultaneously
supports knob dimming and 0-10V
dimming
4 output terminals, 500mA constant
current (6W); Simultaneously
supports knob dimming and 0-10V
dimming