Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support FUEL CADDY USER MANUAL Model: JGC32P We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 3
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. 2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. GENERAL SAFETY RULES When using this product, basic precautions should always be followed, including the following;...
Page 5
This product is not suitable for placing in a yacht, off-road vehicle, and another violent vibration place. Never use the fuel caddy near open flames or heal sources. SAVE THESE INSTRUCTIONS MODEL AND PARAMETERS Model JGC32P Capacity 32 Gal Fuel Type Diesel,Lubricating Oil,Gasoline Oil Discharge Hand Pump Max.
STRUCTURE DIAGRAM 1. Handle 2. Fuel Tank 3. Fixed Wheel 4.Outlet 5. Hand Pump 6. Fixed Mount 7. Hose 8. Fuel Tank Cap 9.Universal wheel - 4 -...
Page 7
COMPONENTS Name and Picture Picture Name and Qty Φ13-Φ19 Hose Fuel Tank(x1) Clamp(x1) Hand Pump Bolt(x3) (x1) Fuel Tank fixing plate (x1) Cap (x1) Short oil hose(x1) Tape(x1) Long oil Hose Rubber Washer(x1) (x1) Φ16-Φ25Hos User Manual(x1) e Clamp(x1) - 5 -...
Page 8
ASSEMBLY Step1: Install hand pump(2) and fixing plate(9), lock with bolts (8), as shown below.Put on the fuel tank cap(3). Step2: Install the long oil hose (5) on the connector of pump with clamp(6), fully tight it. Install the short oil hose (10) on the connector of tank bottom with clamp(7) , connect the other hose head on hand pump and fully tight them too.
Attention: Please turn the clamp head way as follows to avoid touch with ground. RIGHT WRONG OPERATION Refueling operation: -Please choose the appropriate oil filling, do not fill with chemicals or other corrosive solvents. -Lay the tank flat and make sure the direct ball valve joint is closed. -Open the tank cap and fill the oil.
MAINTENANCE 1. Please clean the measure and filter regularly. 2. Keep away from fire. 3. After using a gasoline tank, it is recommended to lubricate the pump—Remove the long hose, add a small amount of oil at the outlet, slowly rotate the pump counter-clockwise, and fully lubricate the pump body.
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the JGC32P and is the answer not in the manual?
Questions and answers