Onboard Tool Kit; Windshield Wiper Blades - BMW 740I Owner's Manual

Onboard tool kit

162n
The onboard tool kit is located in the
luggage compartment lid.
Loosen the wingnut to open.

Windshield wiper blades

1 To fold the wiper away from
windshield:
Switch on the ignition.
Move the wiper lever to position 1
(intermittent wipe).
Switch the ignition off again when the
wipers are stationary in the intermit-
tent cycle – they will then move to a
roughly vertical position
2 Fold the wiper arm completely out
3 Position the wiper blade at an angle
and pull the release spring (arrow)
4 Fold the wiper blade down and un-
hook it toward the windshield
5 Pull the wiper blade past the wiper
arm toward the top
6 Insert a new wiper blade and apply
pressure until you hear it engage.
Use only wiper blades approved
by BMW.<
Fold the wipers back down onto
the windshield before you turn the
ignition to position 1 or 2.<
Online Edition for Part-No. 01 41 9 791 187 - © 12/98 BMW AG