BMW 525I SEDAN Owner's Manual page 124

Luggage compartment – sport wagon
124n
Removing the roll-up cover and
partition net
1. Press on the buttons (arrow 1) to
release the case on both sides
2. Holding the case straight, pull out to
the rear (arrow 2).
Installation
Simply slide the case forward in the two
side holders until it engages.
Storage
There are holders for the case in front
of the rear seats.
Guide the case in from the side as
shown in the illustration. The strap of
the partition net must be directed
upward, while the end of the roll-up
cover must be laid around and under
the case to the rear.
You can pull the partition net out and
insert it in the holders above it in the
upper roof area.
Side covers
Open the side covers by pressing the
button.
Online Edition for Part No. 01 41 0 156 213 - © 09/01 BMW AG