Schaudt EBL 264-9 D Operating Instructions Manual

Operating Instruction Manual
Energy Management System EBL 264-9 D Art.-No 911.468 Page 1 / 8
Contents
1. Description
2. Safety Information
3. Operating Instructions
4. Transport, Storage, Installation
5. Electrical Installation
6. Power-Up, Shut-Down, Maintenance
7. Malfunctions
8. Enclosure
1. Description
The energy system EBL 264-9 D contains the charging module LAS 1218, the complete 12V
distribution, fused 12V circuits, a connector for a solar regulator and additional control and
monitoring devices.
The charging unit is designed as a primary controlled switch-mode power supply.
This modern design ensures high power output with compact dimensions and light weight.
To operate the energy system and to control the living-area functions including accessories,
an instrument panel is compulsory.
1.1 Suitable Accessories (not supplied)
control and switch panel
solar regulator
additional charger
1.2 Technical Data
1.2.1 General Data
sizes (h x w x d in mm)
weight
cabinet
frontpanel
1.2.2 Electrical Data
mains supply
power consumption
suitable batteries
steady load off
living-area battery
load current of D+ output
of alternator by EBL
note: operating instruction manual is intended for the owner and has to come with the EBL
Schaudt GmbH – Elektrotechnik & Apparatebau – Daimlerstr.5 – 88677 Markdorf
Telefon +49 7544 9577-0 Telefax +49 7544 9577-29 eMail kontakt@schaudt-gmbh.de
instrument panel IT 264 and its versions
LR 1214 art.no 922.202, for solar modules with a maximum total
current of 14A, with 3-p connector and a 0.5m connecting cable.
Schaudt Battery Chargers of type LAS... with max 18A charging current.
Additional charging cables of different lengths are available on inquiry.
130 x 275 x 170 incl. mounting sockets
2 kg
PA (Polyamid), gentian blue RAL 5010
aluminium, powder painted, light grey RAL 7035
* 230 V, ± 10 %, 47 - 63 Hz sinusoidal, safety class 1
* 1.9A
* 6 cell lead-acid or lead-gel batteries, more than 55Ah
* without mains supply, battery alarm off, battery voltage 12.6V
and with IT 264-8: 0.6mA
* approx 0.5A without load at the D+ terminal,
see block diagram
22.05.2003