BMW 135I - ANNEXE 168 Manual page 63

Formats and units of measure
You can set formats and units of measure.
For operating principle refer to page 60.
1. Switch on the ignition, refer to page 48.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
4. Use button 1 to select desired format or
desired unit of measure, e.g. for fuel con-
sumption.
> Fuel consumption: mpg, km/l,
l/100km
> Distance covered: mls, km
> Time: 12h, 24h format
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2.
The setting is stored for the remote control
currently in use.
Online Edition for Part no.01 41 0 014 689 - © 11/07 BMW AG
Resetting to factory settings
You can reset the formats and units of measure
back to the default settings.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
2. Press button 2.
Use button 1 to select "RESET".
3.
4. Press button 2 until
The settings are reset.
The setting is stored for the remote control
currently in use.
is displayed.
61