BMW 135I - ANNEXE 168 Manual page 36

9. Attach the handle of the screwdriver to the
Allen wrench and insert the wrench into the
opening provided.
10. Turn the Allen wrench all the way to the left,
arrow 7, until the front convertible top frame
is locked to the windshield frame. The rear
convertible top frame is automatically
pressed down onto the convertible top box
cover and is sealed tight under tension.
The closing procedure must be fully com-
pleted, otherwise damage or injury may
occur.
Please contact your BMW center to have the
cause of the malfunction
Wind deflector
The wind deflector keeps air currents in the
passenger compartment at a low level when the
convertible top is down and provides for an
even more pleasant journey at higher speeds.
Installation
1. Remove the wind deflector from the protec-
tive cover and unfold it, arrows 1.
2. Press together the top and bottom parts of
the wind deflector until the catch engages,
arrow 2.
34
Online Edition for Part no.01 41 0 014 689 - © 11/07 BMW AG
eliminated.<
3. Position both locking pins of one side at the
openings provided for them.
4. Press the wind deflector into the openings,
arrows 3, overcoming the tension in the
springs, and push the free locking pin in the
same direction, arrow 4.
5. Position the free locking pins at the corre-
sponding openings and let the spring ten-
sion lock the wind deflector in place.
6. Fold up the top section of the wind deflec-
tor.
With the wind deflector installed: do not
recline the front-seat backrests too far if
the seat is to be slid all the way back, as this
would damage the wind
Removing the wind deflector
Proceed in the reverse order as used for instal-
lation.
deflector.<