Polaris Ride Command RC-7 User Manual page 64

MAINTENANCE
UPDATE SOFTWARE
Slingshot features Over-the-Air (OTA) update capability. An OTA update pushes
new features, improved functions, and bug fixes to the display, and occurs
automatically when the vehicle is connected to the cellular network. OTA
updates occur seamlessly, without the need to download, refresh, or take any
actions to activate an update.
Before updating the display, always export your existing drives and waypoints
to a secondary USB drive to avoid losing them. Do not save them to the same
USB used for installing the software update. You must use an empty USB drive
Slingshot 2017–2019
Software Update
Map Update
Slingshot 2020 or newer
Software Update
Map Update
To update the display software, complete the following steps:
ON YOUR PERSONAL COMPUTER
1. Go to ridecommand.slingshot.polaris.com/en-us/ridecommand.
2. Log in to your account, or create a new account.
3. Using the Vehicle Identification Number (VIN), add your new Polaris
Slingshot to your Garage.
4. Locate and download the latest software to a USB flash drive.
For optimal download speed and connection stability, it is recommended to
have a wired internet connection to your personal computer while downloading
62
NOTICE
for all software and map updates.
NOTICE
updates to your USB flash drive.
USB Hardware
8GB USB formatted to FAT32
8GB USB formatted to FAT32
USB Hardware
1GB or larger USB formatted to
exFAT®
32GB or larger USB formatted to
exFAT®