Crua Outdoors Duo Instruction Manual

WE ARE
Crua Duo / Maxx
crua
OUTDOORS
Insert poles into sleeves
LIVE TOUGH! SLEEP EASY!
Instruction Guide
UNPACKING & SETTING UP YOUR NEW TENT
• Select a level site clear of rocks, branches and other hard or sharp objects to set up your tent.
• Remove all the content from the bag and unroll your tent. Temporarily stake down all four corners.
• Assemble all three poles and spread out tent. *Note: there are two longer poles and one shorter
pole (Porch Pole).
• Insert a long pole through one pole sleeve located on top of the tent. Repeat this process with the
remaining long pole and sleeve. Poles will cross each other at the centre.
• After sliding poles through the sleeves, flex poles into an arch and insert end pole connector
at corners of tent.
• Insert shorter pole (Porch Pole) into sleeve located on the front of the flysheet. Caution: Make sure
the pole sleeve fabric is distributed evenly along pole and doesn't catch at the pole joints. Failure to
do so could put undue stress on the poles causing breaks or it could tear the fabric.
crua
OUTDOORS