Advertisement
WE ARE
X-Tent
crua
OUTDOORS
Insert poles
into sleeves
LIVE TOUGH! SLEEP EASY!
Instruction Guide
UNPACKING & SETTING UP YOUR NEW TENT
• Select a level site clear of rocks, branches and other hard or sharp objects to set up your tent.
• Remove all contents from the bag and roll out the tent. Temporarily stake down all four corners
of the tent.
• Assemble the 2 black poles. Note there are 4 silver extension sections to be used when you raise the tent
to standing height. Set them aside until after the tent is erected in the low mode. There are also 2 orange
poles and 2 orange extension sections for the porch which will be used later.
• Insert the black pole into the sleeve in the bug mesh on the top of the tent. Repeat this process with the
remaining black pole and sleeve. The pole will cross each other at the center.
crua
OUTDOORS
Advertisement
Table of Contents
Related Manuals for Crua Outdoors X-Tent
Summary of Contents for Crua Outdoors X-Tent
- Page 1 WE ARE crua OUTDOORS X-Tent Instruction Guide UNPACKING & SETTING UP YOUR NEW TENT crua • Select a level site clear of rocks, branches and other hard or sharp objects to set up your tent. OUTDOORS • Remove all contents from the bag and roll out the tent. Temporarily stake down all four corners of the tent.
- Page 2 Flex Poles into • After sliding the poles through the sleeves, flex the poles into an arch and insert the pin attached to the an arch. tent into the pole. • Find the plastic hooks on the tent and clip them to the poles. NOTE: some of the clips have adjustments on the webbing.
Need help?
Do you have a question about the X-Tent and is the answer not in the manual?
Questions and answers