Page 1
Vacuum drip tray Lower sealing ring Thank you for purchasing this Vacuum Sealer from DMD Collective. The vacuum packaging process extends the life of foods by removing most of the air from the sealed container, thereby reducing oxidation, which affects nutritional value, flavour, and overall quality.
Health and Safety Guidelines • Always unplug the appliance when not in use, before cleaning, or when adding or removing parts. Please read the instructions carefully before using any appliance. • Always ensure that the voltage on the rating label corresponds to the mains voltage in your home. •...
• Avoid pouring liquid into the bag for vacuuming, as excess liquid can cause tightness. Sealing failure or air leakage may even damage the machine Plastic Bags • Please use the bags/roll included or purchase universal vacuum sealer bags/rolls for your appliance. Normal plastic bags can only be sealed not vacuum sealed.
Make a Vacuum Bag Fig. 1 To create a vacuum bag using the roll included, move the cutting knife to the left. Flip up the knife holder and thread the roll film through the gap between the bottom and the machine (Fig.1). Pull out the required roll length, press the left side of the roll film with your left hand, and swipe the cutting knife from left to right with your right hand (Fig.
Page 5
Using the Extet Vac Function The EXTET/VAC function allows you to vacuum seal more than just bags. Use it to attach to plastic containers, lids, jars, or bottle tops, as long as the suction fit can fit onto the surface. For containers with a wider opening, like large jar lids, you can find compatible vacuum nozzle attachments (sold separately) to expand your sealing options.
Disassembly & Cleaning Open the upper cover 90 degrees from the base, press the base tightly with your thumb and push the index finger forward. Open the cover (Fig. 6). Remove the base and rinse with water (Fig. 7). WARNING! Do not clean the upper cover with water, as this may cause an electrical hazard. Wipe clean only. Fig.
Troubleshooting Fault Reason Solution No lights on the control panel. The applance is not plugged in Make sure that the appliance properly. is plugged into the mains supply socket & turned on. The vacuum pump is running The cover is not fastened. Press the sides of the top but does not vacuum.
Need help?
Do you have a question about the DMD122 and is the answer not in the manual?
Questions and answers