Advertisement
Quick Links
Unpack the heater to make sure that all the items are present
and that there are no components left in the box and that the
Instruction Manual
heater head is free from any packing material.
Using the detailed drawing follow the steps to assemble your
heater.
Do not connect the heater to the electrical supply until all the
assembly is complete.
Do not connect the heater to the electrical supply if any of the
Electric Patio Heater
components or the power cord is damaged in any way.
If in doubt contact your supplier.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
ZHQ2498-W
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance
shall
not
be
made
by
children
without
supervision.
WARNING: This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they are occupied by
persons not capable of leaving the room on their own, unless constant
supervision is provided.
Children of less than 3 years should be kept away unless continuously
supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the
appliance provided that it has been placed or installed in its intended normal
operating position and they have been given supervision or instruction
Please read these instructions carefully before using your
concerning use of the appliance in a safe way and understand the hazards
new heater
involved. Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
Advertisement
Related Manuals for Tuindeco ZHQ2498-W
Summary of Contents for Tuindeco ZHQ2498-W
- Page 1 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental ZHQ2498-W capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Page 2: Installation
⚫ These appliances must be earthed. Installation Heater ZHQ2498-W is built with the best quality components in accordance to the prevailing legal regulations and certified for safety in use. For best results from the appliance please ensure that the installation is done by a qualified electrician in accordance with the following instructions and taking full account of current regulations. - Page 3 Installation to Wall distance of at least 4.0m from the source of danger. ⚫ When fixing the heater to a wall, ensure hinges are in the ⚫ If the heaters are placed in areas where spray painting of any underside so that the lid hands down in the open position. description is taking place, they should not be used during the ⚫...
- Page 4 Step 2: Install the bracket on the back of the heater. Adjust the four sliders which inside the track to the middle of the heater .Fix the bracket which you have assemble in the step 1 with four ○ Step 4: Put the heater on the wall, slide it into the part 1 ○...
- Page 5 Caution Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. 1. Mount the heater outside or in a large open area and well away from any obstructions such as branches or where the heater is near any objects that can be affected by heat, such as furniture, curtains or other inflammable objects (minimum distance 1...
- Page 6 29. Don’t use this heater in place where causticity or volatile air from a distance of 1M at least. 14. The Marking concerning covering shall be visible after the exists, such as dust, steam, gas, etc. 30. Don’t use this heater as a cloth drier or towel drier. heater has been installed.
- Page 7 Operation ⚫ The remote control: Connect the power cable to a 13 amp supply which is located in a safe, dry area. ⚫ The switch on the heater is used to control the Heater. When the position mean on the 【ON】 , the first indicator light will be turn red, the heater will be in standby mode.
Need help?
Do you have a question about the ZHQ2498-W and is the answer not in the manual?
Questions and answers