Advertisement
SPIRE3
Heater | Cooling Fan | Air Steriliser
VS001-W (White) | VS001-B (Black) | VS001-G (Grey)
Before using the unit, please read these instructions and keep them for future reference
Made in China
Distributed by: Vybra Solutions Ltd, 5 Kingsway, Andover, UK
sales@vybrasolutions.co.uk +44(0) 330 100 5206
Advertisement
Table of Contents
Related Manuals for Vybra SPIRE3
Summary of Contents for Vybra SPIRE3
- Page 1 Heater | Cooling Fan | Air Steriliser VS001-W (White) | VS001-B (Black) | VS001-G (Grey) Before using the unit, please read these instructions and keep them for future reference Made in China Distributed by: Vybra Solutions Ltd, 5 Kingsway, Andover, UK sales@vybrasolutions.co.uk +44(0) 330 100 5206...
-
Page 2: Important Safety Information
1. Important Safety Information WARNING When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury. ‣ This appliance is suitable for indoor use only and should not be used outdoors. ‣... -
Page 3: Product Description
2. Product Description Equipped with PTC heating elements, this product generates heat through hot air which heats the room. Cover Air outlet Body Power button Display Air inlet Base Power cable Switch... -
Page 4: Remote Control
3. Remote Control ‣ Cooling mode ‣ Heating mode ‣ Increase temperature ‣ Oscillation mode ‣ Turbo mode ‣ UV sterilisation ‣ Increases air speed ‣ Timer ‣ Reduces temperature ‣ Reduces air speed ‣ Sleep mode NOTE: When the remote is operated, the main buzzer will make a “beep”... - Page 5 The appliance can be switched on and off by pressing the “ON/OFF” button Press the sleep mode button on the remote control The display reads “L” and the air speed is minimised Press the button again to exit the sleep mode (You can also exit the current mode by pressing the “air speed +”...
-
Page 6: How To Use The Remote Control
4. How to Use the Remote Control For the best signal, point the remote control at the unit. Effective distance is 5 m Signal receiver Warning ‣ When appliances are controlled remotely, frequency overlapping may occur. ‣ The unit may react when using remote controls operating other appliances. - Page 7 5. Instruction for using the heating mode Press the heating mode button. The ambient temperature will be shown on the display. Press the temperature button to set the desired temperature. The display flashes and allows the temperature to be set between 1 and 30°C. For the heating function to be activated, the set temperature should be higher than the ambient temperature.
- Page 8 6. Unit Power button : power on : power off Insert the plug into the socket then press the power on/off switch to start the unit - this puts it into standby mode. Press the power button of the unit. The buzzer will prompt you to click and the fan will start running.
- Page 9 7. Installation Location and Precautions Location Place the appliance in a horizontal position. Do not use the appliance in high-temperature and high-humidity environments (bathroom, kitchen). Do not cover! High temperature! Do not place objects within 1metre Safety system Equipped with an overheat protection sensor and automatic failover, this unit will switch off automatically if it is falls over or overheats.
- Page 10 8. Remote control and Troubleshooting How to insert the batteries: 1. Open the battery cover of the remote control Battery cover 2. Insert two new AAA batteries 3. Close the battery cover of the remote control Check batteries have been inserted correctly.
-
Page 11: Maintenance And Care
9. Maintenance and Care Unplug the power supply before performing any maintenance or cleaning work The appliance must NOT be placed in, or covered with water, Keep away from water. Do not use petrol, alcohol, bleach or any metal objects to wipe the surface of the appliance, as these substances/objects might cause discolouration of the surface. -
Page 12: Smart Life
Click “all devices” on the right side and select the fan. 6. The app will automatically pair to the appliance. Once the appliance has been found, you will be notified. You can now rename your appliance. Press “done” to finish the process. Please scan to download your SPIRE3 User Manual... - Page 13 11 A guide to 2.4GHz and 5GHz networks If you own a “dual band” router (identified on the sticker on the back), you will have the option of using two bands throughout your home: 2.4GHz and 5GHz. What’s the difference between 2.4GHz and 5GHz? Each WiFi enabled device in your home can connect to one of the 2.4GHz or 5GHz bands at one time.
- Page 14 How do I switch between 2.4GHz and 5GHz on my device? Windows • Click on the WiFi icon in the bottom right corner of the task bar. • Then click on the network you want to use from the list of available networks.
- Page 16 Vybra Solutions Ltd 5 Kingsway | Walworth Industrial Estate Andover | SP10 5LQ sales@vybrasolutions.co.uk +44(0) 330 100 5206 Find more products from Vybra Solutions at: vybrasolutions.co.uk ESTI EN 303 645 Compliant...
Need help?
Do you have a question about the SPIRE3 and is the answer not in the manual?
Questions and answers