Page 1
WARNING: To reduce the risk of injury, the user must read and understand the Owner’s Manual before using this product. Save these instructions for future reference. Please contact FLEX customer service in Australia 1300 000 346 or New Zealand 0508 000 346 any time you have questions or warranty claims.
SAFETY SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
IMPORTANT SAFETY INSTRUCTIONS Read all safety warnings, Under abusive conditions, liquid may WARNING instructions, illustrations beejected from the battery; avoid contact. and specifications. Failure to follow all If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally instructions listed below may result in electric shock, fire and/or serious injury.
SAFETY RULES FOR BATTERIES Before using battery, read all instructions Do not recharge battery in damp or wet and cautionary markings on (1) battery environment. Do not expose charger to rain charger, (2) battery pack, and (3) product or snow. Water entering battery charger may using battery.
Page 5
SYMBOLS IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Symbol Name Designation/Explanation Volts Voltage Amperes Current Hertz...
Page 6
3.5Ah 6.0Ah 10.0Ah Battery Voltage 24V d.c Battery Type Lithium-Ion Charger Compatibility FXA0421, FXA0431 Recommended Charging -7 – 45℃ Temperature Recommended < 50℃ Storage Temperature NOTE: Use of chargers or battery packs not sold by FLEX will void the warranty.
(MODEL FXA0311 ONLY) indicator button again. If the fault is fixed, the power indicator will display the battery charge The battery pack FXA0311 features self- level. inspection function. Press and hold the power- If the fault isn’t fixed, replace the battery...
LOW-CAPACITY WARNING The power delivered to the tool will drop quickly when the battery pack is at the end of its run If one LED on the power indicator begins to time and needs to be charged. When the flash, the battery pack charge is under 10% battery pack is completely discharged or over- capacity and should be recharged.
We recommend that all tool service be inserting pointed objects through openings. performed by a FLEX Factory Service Center or Certain cleaning agents WARNING Authorized FLEX Service Station.
If the Customer registers its purchase of the Product online at www.flex-tools.com.au or by calling • 1300 000 346 in Australia or www.flex-tools.co.nz or by calling 0508 000 346 in New Zealand within 30 days of the date of its purchase (Registration), the Warranty Period for the following Products is as follows: FLEX 24V Tools: 5 years;...
The Warranty does not apply if: a) the Product is not supplied in its final shape and form by Chervon or an authorised FLEX Dealer, which can be confirmed on the website store locator (for avoidance of doubt, third party online stores such as eBay, Gumtree, Amazon, etc.
Page 12
*Original purchaser must register the product(s) within 30 days of purchase and retain their receipt as proof of purchase. This warranty applies only to the original purchaser from an authorised FLEX dealer and may not be transferred. If original purchaser does not register their product within 30 days, the warranty will apply for the duration set out in table above in column ‘LIMITED...
Need help?
Do you have a question about the FXA0311 and is the answer not in the manual?
Questions and answers