Subscribe to Our Youtube Channel
Related Manuals for NICEDAY 6603W6LEN
Summary of Contents for NICEDAY 6603W6LEN
- Page 1 TWIST STEPPER EXERCISE MACHINE USER MANUAL IMPORTANT! Please keep the user manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: nicedayfitnesscs@gmail.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION SPEC Product Size : 375*350*305mm Product Weight: 6.6 KG IMPORTANT INFORMATION 1. This exercise machine has been tested and certified to EN ISO 20957-1:2013 & EN ISO 20957-8:2017 (Class: HC) 2. The CE marking refers to the Directive 2014/30/EU relating to electromagnetic compatibility. 3. -
Page 3: Exploded Diagram
EXPLODED DIAGRAM PARTS LIST Parts Parts NO... - Page 4 ASSEMBLY INSTRUCTIONS STEP 1 Remove the Main Frame (No. 1) from the box. Turn the Adjustment Knob (No.2) clockwise "+" all the way until it reaches its furthest point. STEP2: Attach the 2 Resistance Bands (No. 3) to the pedal hooks located at the front of the left and right pedals as shown in the picture.
- Page 5 RESISTANCE BANDS INSTRUCTIONS Unscrew the hook nut located on the band until the hook is open as shown in the picture below. Attach the band hook onto the pedal hook and screw the hook nut closed until the pedal hook is secured with the hook nut.
-
Page 6: Maintenance & Care Instructions
MAINTENANCE & CARE INSTRUCTIONS If the stepper screeches during exercise, please discontinue use and do the following: loosen the screw located on the U-Shaped iron then loosen the cable as shown in the picture below. Next, lubricate both the U-Shaped iron and cable to improve the sliding condition. Re-tighten and secure the screw and cable. -
Page 7: Key Functions
EXERCISE METER KEY FUNCTIONS: MODE: Press the MODE button to select a function. (Time, Reps/Min, Count, Calorie and Scan) OPERATION PROCEDURES: AUTO ON/OFF: If the steps of the machine are put into motion or the MODE button is pressed, the meter will activate and will remain active during use. -
Page 8: Changing The Battery
INSTRUCTIONS FOR BATTERY REPLACEMENT STEPS 1. Turn out the screw with a wrench. (This wrench is a commonly used tool and is not specially equipped) 2. Remove the meter and remove the plastic cap from the battery, then remove the battery, Insert a new battery. Place the plastic cap over the battery, Connect the meter wire onto the meter.
Need help?
Do you have a question about the 6603W6LEN and is the answer not in the manual?
Questions and answers